1970s small hatchback with divided tail lamps
Free CAD block from the Cars, front and rear library (28 blocks), drawn 1:1.
About this block
1970s small hatchback with divided tail lamps, drawn in rear elevation. It measures 4' 7" wide and 3' 11" high (1.40 m × 1.19 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the Cars, front and rear library: 28 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
The rear of a very small 1970s hatchback suits sections through tiny mews garages, a street section with a micro stall and the elevation of a car museum display; the divided tail lamps and narrow body set it apart from later cars. It is the smallest rear view in the set.
Clearances to leave
Nothing in the set is narrower: 55 in (140 cm) leaves 26 in (65 cm) either side of a 9 ft (270 cm) stall, and a micro stall holds it easily. The 47 in (119 cm) roof sits far below any soffit. Backing out still needs the usual 24 ft (730 cm) aisle, so a small car does not shrink the parking lot.
Pairs with
Set it with the Retro round compact with domed hood for a pair of small classics in a garage section, with Simple rounded figure with oval head standing at the door. Brick coursing drawn behind the cars gives the mews a texture.
Common questions
What are the dimensions of this block?
It measures 4' 7" | 1.40 m wide by 3' 11" | 1.19 m high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
How tall is it compared with a person?
At 3' 11" it reaches about 69% of the height of a 5' 9" adult.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 4' 7"1.40 m
- Height
- 3' 11"1.19 m
- View
- Rear elevation
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- Cars, front and rear
Collections
Drawing at scaleRear elevation
Shown beside a 5' 8" (1.74 m) person, both at the same scale.
Dimensions and sizes
Width 4' 7" | 1.40 m, height 3' 11" | 1.19 m.
Explore at scale
How big is it?
At 3' 11" high it reaches 69% of an adult's height and 57% of a door.
On your sheet
At 1" = 1'-0" the drawing prints 4.58 in × 3.91 in on Letter.
In the room
Elevation at real sizeCheck passes
Garage door elevation
Built around the 1970s small hatchback with divided tail lamps, the block you are viewing.
Checks
- Side2' 2"Minimum 12", recommended 15½"
Design notes
- Single garage doors are commonly 7' 10" to 9' 10" wide and 6' 11" to 7' 10" high.
- Allow 15½" or more each side of the car so the doors open inside the garage.
The kit, 2 blocks