Cab-over tractor with twin stacks and box trailer
Free CAD block from the Trucks and trailers library (17 blocks), drawn 1:1.
About this block
Cab-over tractor with twin stacks and box trailer, drawn in front elevation. It measures 6' 4" wide and 12' 2" high (1.92 m × 3.72 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the Trucks and trailers library: 17 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
A cab-over tractor seen head-on goes in sections across a service yard, in the elevation of a truck scale canopy and in a street section where a European-style truck faces the viewer; its flat front and twin stacks distinguish it from the long-nose version in the set.
Clearances to leave
The 6 ft 4 in (192 cm) width in a 11 ft 6 in (350 cm) truck scale lane leaves 31 in (79 cm) each side for the mirrors; the stacks top out at 12 ft 2 in (372 cm), so a 14 ft (430 cm) canopy clears them. Keep 48 in (120 cm) between the lane and any curb.
Pairs with
Set it with the Long-nose tractor with twin stacks and box trailer to compare cab styles head-on, with Broad figure in long coat with legs apart at the gate. Lane markings on the elevation base line finish it.
Common questions
What are the dimensions of this block?
It measures 6' 4" | 1.92 m wide by 12' 2" | 3.72 m high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
How tall is it compared with a person?
At 12' 2" it reaches about 214% of the height of a 5' 9" adult.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 6' 4"1.92 m
- Height
- 12' 2"3.72 m
- View
- Front elevation
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- Trucks and trailers
Also drawn as
Collections
Drawing at scaleFront elevation
Shown beside a 5' 8" (1.74 m) person, both at the same scale.
Dimensions and sizes
Width 6' 4" | 1.92 m, height 12' 2" | 3.72 m.
Explore at scale
How big is it?
At 12' 2" high it reaches 214% of an adult's height and 179% of a door.
On your sheet
At 1/4" = 1'-0" the drawing prints 1.57 in × 3.05 in on Letter.
In the room
Elevation at real sizeCheck passes
Garage door elevation
Built around the cab-over tractor with twin stacks and box trailer, the block you are viewing.
Checks
- Side15½"Minimum 12", recommended 15½"
Design notes
- Single garage doors are commonly 7' 10" to 9' 10" wide and 6' 11" to 7' 10" high.
- Allow 15½" or more each side of the car so the doors open inside the garage.
The kit, 2 blocks