Hatched slender tree with upright oval crown
Free CAD block from the Trees in elevation library (67 blocks), drawn 1:1.
About this block
Hatched slender tree with upright oval crown, drawn in elevation. It measures 6' 10" wide and 19' 9" high (2.08 m × 6.01 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Trees in elevation library: 67 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Row-house street elevations, a narrow alley section and a flat-tone board where trees must not swallow the facades take a slender hatched tree with an upright oval crown. Place it in a front yard or a sidewalk tree pit, where a 6 ft 10 in (208 cm) crown fits between two bay windows and the 19 ft 9 in (601 cm) height reaches the eaves of a two-story row house.
Clearances to leave
Slender crowns at 6 ft 10 in (208 cm) can sit 10 ft (3 m) apart along a row, 13 ft (4 m) from the house footing. Hold the trunk 18–24 in (46–61 cm) from the curb in a 47 × 47 in (120 × 120 cm) pit, and let the crown start at 8 ft (2.4 m) above the sidewalk.
Pairs with
Alternate it with the Hatched narrow conifer with tiered silhouette along the alley and keep the Hatched rounded canopy mass without trunk for the garden at the end. A Person in jacket walking with briefcase sets the scale on the sidewalk.
Common questions
What are the dimensions of this block?
It measures 6' 10" | 2.08 m wide by 19' 9" | 6.01 m high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 6' 10" wide, 6' 10" deep and 19' 9" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scaleElevation
Shown beside a 5' 8" (1.74 m) person, both at the same scale.
3D model
Built at real size from the elevation drawing, by turning the elevation about its trunk. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 6' 10" | 2.08 m, height 19' 9" | 6.01 m.
Explore at scale
How big is it?
At 19' 9" high it reaches 346% of an adult's height and 289% of a door.
On your sheet
At 1/4" = 1'-0" the drawing prints 1.70 in × 4.93 in on Letter.
In the room
Elevation at real size
Street front elevation
Built around the hatched slender tree with upright oval crown, the block you are viewing.
Design notes
- Street trees are usually planted 19' 8" to 32' 10" apart, at least 3' 3" from the curb.
- A parallel parking bay is about 6' 7" to 8' 2" wide and 18' 1" to 19' 8" long.
- People and cars at real size give clients an instant sense of scale in a facade drawing.
The kit, 7 blocks