Mannequin figure waving with other arm across waist
Free CAD block from the People in plan and front view library (50 blocks), drawn 1:1.
About this block
Mannequin figure waving with other arm across waist, drawn in front elevation. It measures 16½" wide and 5' 10" high (42 cm × 1.78 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People in plan and front view library: 50 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
A raised waving arm makes this figure someone hailing a friend across a square, a foyer or an airport hall, so it suits large public sections and presentation elevations that need some life. Place it at a balcony edge in an atrium section, or at the curb on a street elevation. Drawn front on, the raised arm clear of the head.
Clearances to leave
The waving hand rises above the 5 ft 10 in (178 cm) crown toward a 80 in (203 cm) door head, and under a 7 ft (213 cm) parking garage soffit it would nearly touch. Width stays at 16½ in (42 cm), less than one 24 in (60 cm) place in line, so it tucks against a balustrade easily.
Pairs with
Its matching plan figure is the Mannequin figure with one arm raised, one across body, for a layout drawn alongside the section. Set it facing the Mannequin figure with hand on opposite shoulder across an atrium void so the wave has someone to aim at.
Common questions
What are the dimensions of this block?
It measures 16½" | 42 cm wide by 5' 10" | 1.78 m high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 16½"42 cm
- Height
- 5' 10"1.78 m
- View
- Front elevation
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People in plan and front view
Collections
Drawing at scaleFront elevation
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 16½" | 42 cm, height 5' 10" | 1.78 m.
Explore at scale
How big is it?
Figure height 5' 10", shown beside an interior door.
On your sheet
At 1/2" = 1'-0" the drawing prints 0.68 in × 2.93 in on Letter.
In the room
Elevation at real size
Street front elevation
Built around the mannequin figure waving with other arm across waist, the block you are viewing.
Design notes
- Street trees are usually planted 19' 8" to 32' 10" apart, at least 3' 3" from the curb.
- A parallel parking bay is about 6' 7" to 8' 2" wide and 18' 1" to 19' 8" long.
- People and cars at real size give clients an instant sense of scale in a facade drawing.
The kit, 7 blocks