Tall tiered pine with hatched foliage pads
Free CAD block from the Trees in elevation library (67 blocks), drawn 1:1.
About this block
Tall tiered pine with hatched foliage pads, drawn in elevation. It measures 12' 8" wide and 22' 11" high (3.86 m × 6.99 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Trees in elevation library: 67 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Mediterranean villa elevations, coastal pine forest sections and a presentation board for a hillside site take a tall tiered pine with hatched foliage pads, the shape of a stone pine or a Scots pine. Put it behind the roof in a section, where the 22 ft 11 in (698 cm) height tops a two-story ridge and the pads fill the sky.
Clearances to leave
A pine at 22 ft 11 in (698 cm) with a 12 ft 8 in (386 cm) crown sits in the large-tree band: 26 ft (8 m) from foundations and 26 ft (8 m) between trunks. The clear trunk below the first pad gives well over 8 ft (2.4 m) of headroom, with the base 39 in (100 cm) from a terrace edge.
Pairs with
Cluster three at different heights with the Conical conifer of simple line branches as the young trees in front, and set the Stocky figure in boxy coat stepping right under the lowest pad. Pale hatch for distant pines, darker for near ones.
Common questions
What are the dimensions of this block?
It measures 12' 8" | 3.86 m wide by 22' 11" | 6.99 m high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 12' 8" wide, 12' 8" deep and 22' 11" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scaleElevation
Shown beside a 5' 8" (1.74 m) person, both at the same scale.
3D model
Built at real size from the elevation drawing, as two copies of the elevation crossed at right angles. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 12' 8" | 3.86 m, height 22' 11" | 6.99 m.
Explore at scale
How big is it?
At 22' 11" high it reaches 401% of an adult's height and 336% of a door.
On your sheet
At 1/8" = 1'-0" the drawing prints 1.58 in × 2.86 in on Letter.
In the room
Elevation at real size
Street front elevation
Built around the tall tiered pine with hatched foliage pads, the block you are viewing.
Design notes
- Street trees are usually planted 19' 8" to 32' 10" apart, at least 3' 3" from the curb.
- A parallel parking bay is about 6' 7" to 8' 2" wide and 18' 1" to 19' 8" long.
- People and cars at real size give clients an instant sense of scale in a facade drawing.
The kit, 7 blocks