Heavyset man in shirt and tie standing
Free CAD block from the People in plan and front view library (50 blocks), drawn 1:1.
About this block
Heavyset man in shirt and tie standing, drawn in front elevation. It measures 2' 3" wide and 5' 9" high (70 cm × 1.76 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People in plan and front view library: 50 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Office build-out elevations and sections through open-plan floors are where a broad-shouldered standing figure in shirt and tie earns his place. Drop him at a meeting room glazed partition, at the end of a bank of desks, or by an elevator lobby in a section, so the reviewer reads the ceiling height against a real body. The front view suits elevations seen square on.
Clearances to leave
The 2 ft 3 in (70 cm) width is wider than the 24 in (60 cm) allowed per person in line, so leave 48 in (120 cm) of corridor if someone has to pass him. At 5 ft 9 in (176 cm), his head lands well below a 80 in (203 cm) door head in a section through a doorway.
Pairs with
He works beside the Man in open suit jacket and tie standing as two colleagues at a counter, or near the Man in shirt and tie gesturing with both hands. Space the trio unevenly so the elevation is not a line-up.
Common questions
What are the dimensions of this block?
It measures 2' 3" | 70 cm wide by 5' 9" | 1.76 m high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 2' 3"70 cm
- Height
- 5' 9"1.76 m
- View
- Front elevation
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People in plan and front view
Collections
Drawing at scaleFront elevation
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 2' 3" | 70 cm, height 5' 9" | 1.76 m.
Explore at scale
How big is it?
Figure height 5' 9", shown beside an interior door.
On your sheet
At 1/2" = 1'-0" the drawing prints 1.14 in × 2.88 in on Letter.
In the room
Elevation at real size
Street front elevation
Built around the heavyset man in shirt and tie standing, the block you are viewing.
Design notes
- Street trees are usually planted 19' 8" to 32' 10" apart, at least 3' 3" from the curb.
- A parallel parking bay is about 6' 7" to 8' 2" wide and 18' 1" to 19' 8" long.
- People and cars at real size give clients an instant sense of scale in a facade drawing.
The kit, 7 blocks