Heavyset man in suit jacket stepping up (semi-tonal)
Free CAD block from the People stepping up library (26 blocks), drawn 1:1.
About this block
Heavyset man in suit jacket stepping up (semi-tonal), drawn in side elevation. It measures 2' 4" wide and 5' 9" high (72 cm × 1.74 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People stepping up library: 26 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
The heavyset suited climber in gray fill, for presentation sections of public buildings where inclusive access is the story: a town hall entrance with steps beside a ramp, a hospital outpatient entrance, a courthouse portico. Place him on the steps with a wheelchair user on the ramp alongside, and the rendered tone gives both figures the same visual weight.
Clearances to leave
His 2 ft 4 in (72 cm) outline and reference height of 5 ft 9 in (174 cm) make him a realistic test for a public stair with risers of 7 in (17 cm). Beside the steps, draw the ramp with a level top landing of 60 in (152 cm), the turning circle a wheelchair needs, alongside him.
Pairs with
Use the Heavyset man in suit jacket stepping up (outline) on working sections. At a hospital entrance render, add timber handrails, and show the same visitor on the entrance plan with the Heavyset person with short hair, arms at sides.
Common questions
What are the dimensions of this block?
It measures 2' 4" | 72 cm wide by 5' 9" | 1.74 m high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 2' 4"72 cm
- Height
- 5' 9"1.74 m
- View
- Side elevation
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People stepping up
Collections
Drawing at scaleSide elevation
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 2' 4" | 72 cm, height 5' 9" | 1.74 m.
Explore at scale
How big is it?
Figure height 5' 9", shown beside an interior door.
On your sheet
At 1/2" = 1'-0" the drawing prints 1.17 in × 2.86 in on Letter.
In the room
Elevation at real size
Street front elevation
Built around the heavyset man in suit jacket stepping up (semi-tonal), the block you are viewing.
Design notes
- Street trees are usually planted 19' 8" to 32' 10" apart, at least 3' 3" from the curb.
- A parallel parking bay is about 6' 7" to 8' 2" wide and 18' 1" to 19' 8" long.
- People and cars at real size give clients an instant sense of scale in a facade drawing.
The kit, 7 blocks