8 of 27
ElevationDWG · DXF · SVG · PNG

Mediterranean dwarf palm (Chamaerops humilis) cluster

Free CAD block from the Palm trees library (51 blocks), drawn 1:1.

10' 2" × 9' 10"3.10 m × 3.00 m, width by height

About this block

Mediterranean dwarf palm (Chamaerops humilis) cluster, drawn in elevation. It measures 10' 2" wide and 9' 10" high (3.10 m × 3.00 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.

From the Palm trees library: 51 blocks drawn to one standard, each one available on its own.

In practice

Author's notes

Where it goes

Dry gardens, roof terraces and the planting strip of a parking-lot elevation take a dwarf palm cluster that stays under a single story at 9 ft 10 in (300 cm) high. Place it in the foreground of a house elevation beneath a window sill, or as the understory beneath taller palms in a section, where its multiple short stems give the ground layer some mass.

Clearances to leave

Treat it as a large shrub rather than a tree: 10 ft 2 in (310 cm) wide, so neighbors in a hedge go about 8 ft (2.5 m) apart, far tighter than any palm row. Give the clump 24 in (60 cm) from a path edge, and expect the fronds to cover any first-floor window whose sill sits below 39 in (100 cm).

Pairs with

Use it under the Golden cane palm (Dypsis lutescens) with ringed trunk or the Windmill palm (Trachycarpus fortunei) with hatched fronds to build a two-layer planting, and put a Figure standing with hands in pockets alongside for height.

Common questions

What are the dimensions of this block?

It measures 10' 2" | 3.10 m wide by 9' 10" | 3.00 m high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.

How tall is it compared with a person?

At 9' 10" it reaches about 172% of the height of a 5' 9" adult.

File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.

Details

Width
10' 2"3.10 m
Height
9' 10"3.00 m
View
Elevation
Scale
1:1, full size
2D formats
DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
Library
Palm trees

Collections

Drawing at scaleElevation

Shown beside a 5' 8" (1.74 m) person, both at the same scale.

Dimensions and sizes

Width 10' 2" | 3.10 m, height 9' 10" | 3.00 m.

10' 2" | 3.10 m9' 10" | 3.00 m

Explore at scale

Drag, zoom, measure
10' 2" | 3.10 m9' 10" | 3.00 m Grid 12", bold every 5' 0"

How big is it?

Same scale
This block9' 10" highPerson5' 8" highDoor6' 10" highSmall car3' 11" high

At 9' 10" high it reaches 172% of an adult's height and 144% of a door.

On your sheet

Print preview
TITLEMediterranean dwarf palm (Chamaerops humilis) clus…VIEWElevationSCALE1/2" = 1'-0"

At 1/2" = 1'-0" the drawing prints 5.08 in × 4.92 in on Letter.

In the room

Scenes built only from cadblock blocks
13' 7"9' 10"Car 11' 1"1342567
This blockRest of the kit

Elevation at real size

Street front elevation

Built around the mediterranean dwarf palm (Chamaerops humilis) cluster, the block you are viewing.

Street front 99' 4"Facade 20' 4" × 22' 4"
Try another tree 8 of 49

Design notes

  • Street trees are usually planted 19' 8" to 32' 10" apart, at least 3' 3" from the curb.
  • A parallel parking bay is about 6' 7" to 8' 2" wide and 18' 1" to 19' 8" long.
  • People and cars at real size give clients an instant sense of scale in a facade drawing.

The kit, 7 blocks

More from Palm trees

All 51 blocks
Three-stem Kentia palm (Howea forsteriana) clumpElevation
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
17' 9" × 16' 4"
Windmill palm (Trachycarpus fortunei) with hatched frondsElevation
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
16' 9" × 16' 10"
Young royal palm (Roystonea regia) with angular frondsElevation
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
20' 2" × 32' 7"
Canary Island date palm (Phoenix canariensis) with spiky crownElevation
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
25' 7" × 34' 4"
Tall date palm (Phoenix dactylifera) with crosshatched trunkElevation
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
21' 9" × 40' 11"
Cabbage palm (Sabal palmetto) silhouette outlineElevation
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
8' 3" × 19' 8"
Foxtail palm (Wodyetia bifurcata) with curved trunkElevation
2DDWG · DXF · SVG · PNG
10' 8" × 22' 0"
Cluster palm with two crowns of notched frondsPlan
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
14' 1" × 11' 7"
Symmetrical feather palm with ten pinnate frondsPlan
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
13' 3" × 13' 7"
Tropical broadleaf palm with gray-shaded pinwheel leavesPlan
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
17' 0" × 17' 8"
High-density fan palm with straight radiating leavesPlan
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
16' 8" × 16' 8"
Textured frond palm with four arching frondsPlan
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
14' 0" × 13' 6"

Similar size

Across trees & plants
Minimalist wireframe palm of twelve radiating linesPlan
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
10' 8" × 10' 9"
Compact star palm with five feathered frondsPlan
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
8' 11" × 9' 1"
Geometric pinnate palm with crosshatched centerPlan
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
11' 4" × 11' 5"
Spiky yucca-like rosette of narrow leavesPlan
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
9' 9" × 9' 6"

Goes well with

From other libraries
Wavy tree outline with large interior leaf lobesPlan
2DDWG · DXF · SVG · PNG
12' 4" × 12' 4"
Rounded line-hatched tree with vase-shaped branchingElevation
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
15' 5" × 19' 8"
Feather palm with six pinnate frondsFront
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
11' 8" × 16' 4"
Slim figure standing with arms at sidesFront
2DDWG · DXF · SVG · PNG
21½" × 5' 8"