Person leaning on braced arm, one leg back
Free CAD block from the People silhouettes library (53 blocks), drawn 1:1.
About this block
Person leaning on braced arm, one leg back, drawn in side elevation. It measures 3' 4" wide and 5' 10" high (1.02 m × 1.78 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People silhouettes library: 53 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
A braced arm and a trailing leg read as someone leaning on a railing or a wall, so this profile suits a balcony section, a viewing platform elevation or a stair landing on a residential board. Stand it with the hand on a drawn balustrade, parapet or counter, so the brace point tests the rail height against a real elbow.
Clearances to leave
The lean stretches the profile to 40 in (102 cm), so place it where 48 in (120 cm) or more of walkway is drawn. At 70 in (178 cm) tall, the braced hand sits near a 43 in (110 cm) balustrade, the height to check on a balcony, and the eye line near 65 in (165 cm) clears a parapet at 48 in (120 cm).
Pairs with
Person pushing wheelchair with seated passenger shares a landing with it, and Person in jacket standing with one knee bent leans on the wall opposite; a balustrade in section and a slab edge below give the balcony its depth.
Common questions
What are the dimensions of this block?
It measures 3' 4" | 1.02 m wide by 5' 10" | 1.78 m high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 3' 4"1.02 m
- Height
- 5' 10"1.78 m
- View
- Side elevation
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People silhouettes
Collections
Drawing at scaleSide elevation
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 3' 4" | 1.02 m, height 5' 10" | 1.78 m.
Explore at scale
How big is it?
Figure height 5' 10", shown beside an interior door.
On your sheet
At 1/2" = 1'-0" the drawing prints 1.67 in × 2.92 in on Letter.
In the room
Elevation at real size
Street front elevation
Built around the person leaning on braced arm, one leg back, the block you are viewing.
Design notes
- Street trees are usually planted 19' 8" to 32' 10" apart, at least 3' 3" from the curb.
- A parallel parking bay is about 6' 7" to 8' 2" wide and 18' 1" to 19' 8" long.
- People and cars at real size give clients an instant sense of scale in a facade drawing.
The kit, 7 blocks