Solid-filled two-piece toilet silhouette with hinge bolts
Free CAD block from the WC toilets library (114 blocks), drawn 1:1.
About this block
Solid-filled two-piece toilet silhouette with hinge bolts, drawn in plan, front and side elevation, the front and side elevations projected from its 3D model with hidden lines removed. It measures 17" wide, 2' 1" deep and 2' 6" high (43 cm × 64 cm × 76 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the WC toilets library: 114 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Solid fill turns the toilet into a dark silhouette that reads at small scales, so it suits presentation plans, sales brochures for apartments and ⅛ in = 1 ft (1:100) marketing layouts more than working drawings. The hinge bolts remain as two white dots, enough to show orientation; put it against the back wall of each bathroom on the colored plan.
Clearances to leave
Silhouettes still need proper spacing: the 17 in (43 cm) toilet should sit with its centerline 18 in (45 cm) from the wall or sink, and its 25 in (64 cm) depth needs 24 in (60 cm) of open floor in front. On a 1/16 in = 1 ft (1:200) sheet that gap shrinks to ⅛ in (3 mm), so check it before printing.
Pairs with
Use it with the Quarter-round corner bathtub with contoured bowl and the Round pedestal sink with angled back and double rim, given the same solid fill on a sales plan. A single gray tone for all fixtures keeps the board calm.
Common questions
What are the dimensions of this block?
It measures 17" | 43 cm wide by 2' 1" | 64 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 17" wide, 2' 1" deep and 2' 6" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 17" | 43 cm, depth 2' 1" | 64 cm, footprint 3.0 ft², height 2' 6" | 76 cm.
Explore at scale
How big is it?
Footprint 3.0 ft², about 0.2× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 1.41 in × 2.11 in on Letter.
In the room
Plan at real sizeAll 3 checks pass
Bathroom layout
Built around the solid-filled two-piece toilet silhouette with hinge bolts, the block you are viewing.
Checks
- Clear floor in front of the toilet7' 1"Minimum 21", recommended 2' 6"
- Center line to the nearest wall or fixture3' 1"Minimum 15", recommended 18"
- Door swing to the nearest fixture6½"Minimum 2", recommended 4"
Design notes
- Toilet and bidet: center line at least 15" from a wall or fixture, 18" recommended.
- Clear floor in front of each fixture: 21" minimum, 2' 6" recommended.
- Sink rim at 2' 7" to 2' 11"; a double vanity needs about 2' 11" between faucets.
- For a wheelchair, plan a 4' 11" turning circle clear of fixtures.
- Keep the door swing at least 2" clear of every fixture, 4" recommended; in a small bathroom the door can open outward or slide.
The kit, 3 blocks