Round pedestal sink with angled back and double rim
Free CAD block from the Toilets, sinks, bidets and urinals library (102 blocks), drawn 1:1.
About this block
Round pedestal sink with angled back and double rim, drawn in plan, front and side elevation, each view as drawn in the original library file. It measures 2' 0" wide, 20½" deep and 2' 9" high (61 cm × 52 cm × 83 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Toilets, sinks, bidets and urinals library: 102 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
A round sink plan with an angled back edge that sits flat on the wall and a double rim line showing the inner bowl. It earns its place in floor plans of modern bathrooms, hotel bathrooms and powder rooms, and in the plumbing layout where the inner rim gives the bowl center for the drain.
Clearances to leave
Allow a 28 in (70 cm) bay around the 24 in (61 cm) sink, and 8 in (20 cm) between rims if two are drawn under one mirror. Depth of 20½ in (52 cm) plus 22–24 in (55–60 cm) in front sets a 42–44 in (107–112 cm) distance to the facing fixture.
Pairs with
In plan, group it with the Two-piece toilet with elongated seat and hinge holes on one wet wall; the elevations show the slim seamed column and the stepped wall flange.
Common questions
What are the dimensions of this block?
It measures 2' 0" | 61 cm wide by 20½" | 52 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 23" wide, 20" deep and 2' 9" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan, front and side drawings, as pressed stainless sheet: the plate and every bowl with sloped walls, the strainer where the plan has its drain, the overflow on the back wall and the waste below; drainers, upstands and faucets where the drawing has them. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 2' 0" | 61 cm, depth 20½" | 52 cm, footprint 3.4 ft², height 2' 9" | 83 cm.
Explore at scale
How big is it?
Footprint 3.4 ft², about 0.2× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 2.00 in × 1.69 in on Letter.
In the room
Plan at real sizeWorks, 1 not ideal
Bathroom layout
Built around the round pedestal sink with angled back and double rim, the block you are viewing.
Checks
- Clear floor in front of the sink22½"Minimum 21", recommended 2' 6"
- Door swing to the nearest fixture5½"Minimum 2", recommended 4"
Design notes
- Toilet and bidet: center line at least 15" from a wall or fixture, 18" recommended.
- Clear floor in front of each fixture: 21" minimum, 2' 6" recommended.
- Sink rim at 2' 7" to 2' 11"; a double vanity needs about 2' 11" between faucets.
- For a wheelchair, plan a 4' 11" turning circle clear of fixtures.
- Keep the door swing at least 2" clear of every fixture, 4" recommended; in a small bathroom the door can open outward or slide.
The kit, 3 blocks