Banquette along a wall with two-seat tables and chairs
Free CAD block from the Restaurant seating layouts library (18 blocks), drawn 1:1.
About this block
Banquette along a wall with two-seat tables and chairs, drawn in plan view. Each of its three tables is 28" × 28" (70 × 70 cm) and 30" (75 cm) high, for two. The whole layout measures 16' 4" wide and 7' 2" deep (4.98 m × 2.18 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Restaurant seating layouts library: 18 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
A banquette along a wall with two-seat tables in front and loose chairs facing it, the classic bistro arrangement. Lay it on a restaurant plan to space the tables along the bench.
Clearances to leave
The tables are 27.6 in (70 cm) wide with 27.7 in (70 cm) between them; the first stands 20.3 in (52 cm) from the side wall, and the chairs are 32.8 in (83 cm) apart. The run along the wall is 16 ft 4 in (4.98 m).
Pairs with
The section of the same arrangement, Banquette, table and chair in section, gives its heights; the Booth with a long table between two benches suits the far corner of the room.
Common questions
How big are the tables?
Each of its three tables is 28" × 28" (70 × 70 cm) and 30" (75 cm) high, for two. The whole layout measures 16' 4" × 7' 2" (4.98 m × 2.18 m).
What are the dimensions of this block?
It measures 16' 4" | 4.98 m wide by 7' 2" | 2.18 m deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 13' 10" wide, 5' 10" deep and 3' 11" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Each table
- 28" × 28"70 × 70 cm, 30" high
- Seats
- 2each, 3 tables
- Overall width
- 16' 4"4.98 m
- Overall depth
- 7' 2"2.18 m
- Footprint
- 117.1 ft²10.88 m²
- View
- Plan view
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- 3D formats
- STEP, OBJ, GLB, 3MF, STL
- Library
- Restaurant seating layouts
Collections
Drawing at scalePlan view
Seen from above beside a standing person, both at the same scale. The clearances are the layout’s own, shown in your unit.
3D model
Built at real size from the plan drawing, piece by piece: the chairs as drawn, each facing its table, tables with a 3 cm top at 30 in (75 cm) on a restaurant pedestal, and banquette or booth benches cut to the banquette section of the same sheet; walls and clearance zones are left out. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Each table 28" × 28" | 70 × 70 cm, 30" | 75 cm high, seats 2 each. The whole layout: width 16' 4" | 4.98 m, depth 7' 2" | 2.18 m, footprint 117.1 ft².

Explore at scale
How big is it?
Footprint 117.1 ft², about 6.0× the floor area of a twin bed.
On your sheet
At 1/4" = 1'-0" the drawing prints 4.09 in × 1.79 in on Letter.
In the room
Plan at real sizeAll 3 checks pass
Restaurant dining room layout
Built around the banquette along a wall with two-seat tables and chairs, the block you are viewing.
Checks
- Main aisle, right side4' 0"Minimum 3' 0", recommended 4' 0"
- Aisle, bottom side4' 0"Minimum 3' 0", recommended 4' 0"
- Door swing to the nearest fixture22½"Minimum 2", recommended 4"
Design notes
- Main aisles, where servers carry trays, are usually 3' 6" to 4' 0" wide; an accessible route needs at least 3' 0" clear.
- Keep 18" to 20" between the backs of occupied chairs at neighboring tables, and about 3' 6" to 5' 0" between the edges of square tables.
- Floor per seat in the dining room, as a rule of thumb: 12.0 ft² to 15.0 ft² for full service, 18.0 ft² to 20.0 ft² for fine dining.
- In the US at least 5% of the seats at tables must be accessible (ADA 226.1), at a table top 2' 4" to 2' 10" high (902.3).
The kit, 2 blocks
