Booth with two benches and a table in section
Free CAD block from the Restaurant seating layouts library (18 blocks), drawn 1:1.
About this block
Booth with two benches and a table in section, drawn in section. It measures 7' 5" wide and 4' 7" high (2.25 m × 1.41 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Restaurant seating layouts library: 18 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
The booth in section, a bench on each side of a pedestal table between two walls. Use it in sections and elevations of a restaurant to show the seat backs and the table height.
Clearances to leave
Between the two booth backs it measures 79.3 in (2.01 m), so a booth of this depth fits between walls or partitions about 7 ft (2.1 m) apart.
Pairs with
It goes with the Booth with a long table between two benches in plan.
Common questions
What are the dimensions of this block?
It measures 7' 5" | 2.25 m wide by 4' 7" | 1.41 m high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 9' 10" wide, 6' 7" deep and 3' 11" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scaleSection
The clearances are the layout’s own, shown in your unit. Shown beside a 5' 8" (1.74 m) person, both at the same scale.
3D model
Booth with a long table between two benches. Built at real size from the plan drawing, piece by piece: the chairs as drawn, each facing its table, tables with a 3 cm top at 30 in (75 cm) on a restaurant pedestal, and banquette or booth benches cut to the banquette section of the same sheet; walls and clearance zones are left out. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 7' 5" | 2.25 m, height 4' 7" | 1.41 m.
Explore at scale
How big is it?
At 4' 7" high it reaches 81% of an adult's height and 68% of a door.
On your sheet
At 1" = 1'-0" the drawing prints 7.40 in × 4.62 in on Letter.
In the room
Section at real sizeAll 2 checks pass
Restaurant dining room in section
Built around the booth with two benches and a table in section, the block you are viewing.
Checks
- Table top2' 6"Recommended 2' 4" to 2' 10"
- Pendant above the table2' 6"Recommended 2' 4" to 2' 9"
Design notes
- Booth and banquette seats sit about 17" to 18" high, under a table top at 2' 5" to 2' 6".
- Hang a pendant 2' 4" to 2' 9" above the table top.
- Leave at least 3' 0" behind a chair that backs onto an aisle, and 4' 0" where servers pass.
- In the US at least 5% of the seats at tables must be accessible (ADA 226.1), at a table top 2' 4" to 2' 10" high (902.3).
The kit, 2 blocks