Square four-seat table with its clearances
Free CAD block from the Restaurant seating layouts library (18 blocks), drawn 1:1.
About this block
Square four-seat table with its clearances, drawn in plan view. It measures 5' 6" wide and 5' 6" deep (1.68 m × 1.68 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Restaurant seating layouts library: 18 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
A square table for four with a chair on each side, the basic unit of most restaurant floor plans. Block out a dining room with it at the right scale before the furniture is chosen.
Clearances to leave
The table is 33.5 in (85 cm) square and the chairs bring the set to 6 ft 3 in (1.91 m) square. Keep 18 in (45 cm) between the chair backs of the next table, and 48 in (120 cm) where a server walks.
Pairs with
Repeat it with the Parallel layout of square four-seat tables, or turn it 45 degrees with the Diagonal layout, to test both arrangements on the same room.
Common questions
What are the dimensions of this block?
It measures 5' 6" | 1.68 m wide by 5' 6" | 1.68 m deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 5' 6" wide, 5' 6" deep and 2' 8" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scalePlan view
Seen from above beside a standing person, both at the same scale. The clearances are the layout’s own, shown in your unit.
3D model
Built at real size from the plan drawing, piece by piece: the chairs as drawn, each facing its table, tables with a 3 cm top at 30 in (75 cm) on a restaurant pedestal, and banquette or booth benches cut to the banquette section of the same sheet; walls and clearance zones are left out. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 5' 6" | 1.68 m, depth 5' 6" | 1.68 m, footprint 30.4 ft².
Explore at scale
How big is it?
Footprint 30.4 ft², about 1.6× the floor area of a twin bed.
On your sheet
At 1/2" = 1'-0" the drawing prints 2.76 in × 2.76 in on Letter.
In the room
Plan at real sizeAll 5 checks pass
Restaurant dining room layout
Built around the square four-seat table with its clearances, the block you are viewing.
Checks
- Main aisle, right side4' 0"Minimum 3' 0", recommended 4' 0"
- Aisle, bottom side4' 0"Minimum 3' 0", recommended 4' 0"
- Aisle, top side3' 0"Minimum 18", recommended 3' 0"
- Aisle, left side3' 0"Minimum 18", recommended 3' 0"
- Door swing to the nearest fixture22½"Minimum 2", recommended 4"
Design notes
- Main aisles, where servers carry trays, are usually 3' 6" to 4' 0" wide; an accessible route needs at least 3' 0" clear.
- Keep 18" to 20" between the backs of occupied chairs at neighboring tables, and about 3' 6" to 5' 0" between the edges of square tables.
- Floor per seat in the dining room, as a rule of thumb: 12.0 ft² to 15.0 ft² for full service, 18.0 ft² to 20.0 ft² for fine dining.
- In the US at least 5% of the seats at tables must be accessible (ADA 226.1), at a table top 2' 4" to 2' 10" high (902.3).
The kit, 2 blocks