Bare round tree with fine branching twigs
Free CAD block from the Trees in elevation library (67 blocks), drawn 1:1.
About this block
Bare round tree with fine branching twigs, drawn in elevation. It measures 9' 11" wide and 14' 9" high (3.03 m × 4.50 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Trees in elevation library: 67 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Winter street elevations, permit drawings for deciduous planting and a section of a northern courtyard take a bare round tree whose fine twigs show the full branch structure. Place it in a courtyard elevation against a brick wall, where 9 ft 11 in (303 cm) of fine twigs reads as a young linden or birch and the 14 ft 9 in (450 cm) height leaves the second-floor windows clear.
Clearances to leave
Fine twigs plot thin, so the 9 ft 11 in (303 cm) crown can sit 13 ft (4 m) from the next tree without the drawing clogging. Keep the trunk 39 in (100 cm) from the courtyard paving edge, 13 ft (4 m) from the wall footing, and the lowest twig 8 ft (2.4 m) above the ground line.
Pairs with
Line a courtyard with it and add the Narrow oval leafless tree with fine twigs in the corners for a taller accent, with the Figure in ankle-length coat standing between them. A single gray tone for the twig layer keeps it quiet.
Common questions
What are the dimensions of this block?
It measures 9' 11" | 3.03 m wide by 14' 9" | 4.50 m high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 9' 11" wide, 9' 11" deep and 14' 9" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scaleElevation
Shown beside a 5' 8" (1.74 m) person, both at the same scale.
3D model
Built at real size from the elevation drawing, as two copies of the elevation crossed at right angles. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 9' 11" | 3.03 m, height 14' 9" | 4.50 m.
Explore at scale
How big is it?
At 14' 9" high it reaches 259% of an adult's height and 216% of a door.
On your sheet
At 1/4" = 1'-0" the drawing prints 2.48 in × 3.69 in on Letter.
In the room
Elevation at real size
Street front elevation
Built around the bare round tree with fine branching twigs, the block you are viewing.
Design notes
- Street trees are usually planted 19' 8" to 32' 10" apart, at least 3' 3" from the curb.
- A parallel parking bay is about 6' 7" to 8' 2" wide and 18' 1" to 19' 8" long.
- People and cars at real size give clients an instant sense of scale in a facade drawing.
The kit, 7 blocks