Built-in two-burner gas cooktop with front knobs
Free CAD block from the Kitchen appliances library (124 blocks), drawn 1:1.
About this block
Built-in two-burner gas cooktop with front knobs, drawn in plan, front and side elevation, all three projected from its 3D model so they match to the millimeter. It measures 2' 7" wide, 19½" deep and 3" high (80 cm × 50 cm × 7.9 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Kitchen appliances library: 124 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Wok-friendly kitchens, small cafés and generous galleys benefit from two large burners spaced wide apart across an 32 in (80 cm) cut-out. The knobs along the front edge show on the layout as a row of small circles. Dimension the knob positions on a ½ in = 1 ft (1:20) counter detail as well as on the floor plan.
Clearances to leave
An 32 in (80 cm) base cabinet takes it exactly; flank it with a 24 in (60 cm) stretch of countertop for hot pans. The front knobs mean the 19½ in (50 cm) depth should sit back from the counter edge, and the hood above should span the full width at 24–30 in (61–76 cm) above the burners.
Pairs with
Combine it with the Twin-burner gas cooktop with vented center panel in a plan that offers two widths, and with the Rounded double-bowl sink with swivel faucet at the other end of a stainless run.
Common questions
What are the dimensions of this block?
It measures 2' 7" | 80 cm wide by 19½" | 50 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 2' 7" wide, 19½" deep and 3" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing, at its real thickness: the top in pressed steel or black glass, each burner with its crown and cap under cast-iron grates or supports, electric plates or zones where the plan has them, and the knobs. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 2' 7" | 80 cm, depth 19½" | 50 cm, footprint 4.3 ft², height 3" | 7.9 cm.
Explore at scale
How big is it?
Footprint 4.3 ft², about 0.2× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 2.62 in × 1.64 in on Letter.
In the room
Plan at real sizeAll 3 checks pass
Galley kitchen layout
Built around the built-in two-burner gas cooktop with front knobs, the block you are viewing.
Checks
- Aisle in front of the cooktop4' 4"Minimum 3' 3", recommended 3' 6"
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks