Twin-burner gas cooktop with vented center panel
Free CAD block from the Ranges and cooktops library (144 blocks), drawn 1:1.
About this block
Twin-burner gas cooktop with vented center panel, drawn in plan, front and side elevation, all three projected from its 3D model so they match to the millimeter. It measures 2' 5" wide, 15½" deep and 4½" high (73 cm × 40 cm × 11 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Ranges and cooktops library: 144 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
A plan symbol for staff kitchens, hotel kitchenettes and compact galley layouts where a two-burner cooktop is the whole cooking surface. The vented center panel between the burners is a distinctive mark at ¼ in = 1 ft (1:50) and sets it apart from the slotted and plate versions. Draw it in the floor plan over its base cabinet; the low-support cooktop elevation gives a matching front view.
Clearances to leave
Give the cooktop 24 in (60 cm) of landing counter on at least one side and keep the aisle in front at 42–48 in (107–122 cm). Being 28 in (72 cm) wide, it needs a base run of two 24 in (60 cm) cabinets beneath it, and the 15½ in (40 cm) depth suits a standard countertop.
Pairs with
Pair it in plan with the Built-in two-burner gas cooktop with front knobs when a comparison is needed, and with the Rounded double-bowl sink with swivel faucet, keeping the two in one continuous steel countertop with no joints.
Common questions
What are the dimensions of this block?
It measures 2' 5" | 73 cm wide by 15½" | 40 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 2' 5" wide, 15½" deep and 4½" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing, at its real thickness: the top in pressed steel or black glass, each burner with its crown and cap under cast-iron grates or supports, electric plates or zones where the plan has them, and the knobs. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 2' 5" | 73 cm, depth 15½" | 40 cm, footprint 3.1 ft², height 4½" | 11 cm.
Explore at scale
How big is it?
Footprint 3.1 ft², about 0.2× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 2.38 in × 1.30 in on Letter.
In the room
Plan at real sizeAll 3 checks pass
Galley kitchen layout
Built around the twin-burner gas cooktop with vented center panel, the block you are viewing.
Checks
- Aisle in front of the cooktop4' 8"Minimum 3' 3", recommended 3' 6"
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks