Close-coupled toilet with seat, lid and floor bolt cap
Free CAD block from the WC toilets library (114 blocks), drawn 1:1.
About this block
Close-coupled toilet with seat, lid and floor bolt cap, drawn in plan, front and side elevation, the plan and the front elevation projected from its 3D model with hidden lines removed. It measures 22" wide, 2' 6" high and 22½" deep (56 cm × 77 cm × 57 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the WC toilets library: 114 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
In side view the close-coupled toilet shows the tank sitting directly on the bowl, the seat and lid closed, and the little cap over the floor bolt at the foot. Reach for it in sections through residential bathrooms and on the side-wall elevation, where the floor anchoring and tank height are checked against the baseboard and tile line.
Clearances to leave
Projection is 22 in (56 cm) from the wall, compact for a close-coupled toilet, so 24 in (60 cm) in front fits a 46 in (116 cm) deep toilet room. The tank top at 2 ft 6 in (77 cm) sits below a 36 in (90 cm) chair rail or a 48 in (120 cm) half-tile line.
Pairs with
Draw it with the Compact two-piece toilet with round seat and hinge holes for a comparison section and the Rectangular three-hole pedestal sink with oval bowl on the same side elevation. A tiled baseboard 4 in (10 cm) high runs behind the toilet foot.
Common questions
What are the dimensions of this block?
It measures 22" | 56 cm wide by 2' 6" | 77 cm high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 18" wide, 22½" deep and 2' 7" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Shown beside a 4' 9" (1.45 m) person, both at the same scale.
3D model
Built at real size from the side drawing. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 22" | 56 cm, height 2' 6" | 77 cm, depth 22½" | 57 cm.
Explore at scale
How big is it?
At 2' 6" high it reaches 44% of an adult's height and 37% of a door.
On your sheet
At 1" = 1'-0" the drawing prints 1.84 in × 2.53 in on Letter.
In the room
Elevation at real sizeCheck passes
Fixture in section
Built around the close-coupled toilet with seat, lid and floor bolt cap, the block you are viewing.
Checks
- Projection22"Recommended 19½" to 2' 6"
Design notes
- Wall-hung and back-to-wall pans project 19½" to 23½"; close-coupled toilets need 2' 2" to 2' 6".
- Add the projection to the 2' 6" of clear floor in front to get the room depth you need.
- Section views like this one are what plumbers ask for: they show where the outlet and the supply sit.
The kit, 2 blocks