Bathroom library · 114 blocks · 29 in 3D
Free WC toilet CAD blocks in plan (top view) and in front and side elevation, in US and metric units, 29 of them: two-piece and close-coupled toilets (water closets) with round and elongated bowls and their seats, a corner toilet, tankless commodes with a flush valve and a compact one-piece. Each is drawn 1:1 in plan or in elevation and comes as DWG and DXF in meters and in inches, SVG and PNG; 28 also in front and side elevation, and 29 as a 3D model in STEP, OBJ, GLB, 3MF and STL. Counting each view and each 3D model on its own, the library holds 114 blocks.
3 blocks of this library · fixture line 9' 1" × 4' 11"
Overall Each fixture, width
Also in the room, from other libraries
All 29 at one scale, packed like a sheet of blocks, with a person in plan for scale. Click a drawing to open its block; the width is under each one, the depth and every format are on the block page.
The toilet drawings side by side, as on the library sheet.
All 29 drawings of the library in one ZIP, one AutoCAD 2013 DWG per block, drawn 1:1, in meters or in inches. Each block page has its own files too, with DXF, SVG, PNG and the 3D model.
114 blocks of 4 kinds, every one drawn from a real piece at full size; the sizes below are the drawings' own, in feet and inches (switch units at the top of the page). By feature: 11 with a push button or trip lever, 7 with a round bowl or seat, 7 with hinge holes or bolts, 6 with an elongated, oval or egg-shaped bowl, 6 with the trapway drawn. The table gives the toilets drawn in plan, width by depth; the elevations are on their own pages, with their height.
| Type | Blocks | Width | Depth | Narrowest … widest |
|---|---|---|---|---|
| Toilets in plan | 18 | 13½" – 2' 1" | 23" – 2' 4" | Compact one-piece toilet with D-shaped trap opening13½" … Elongated two-piece toilet with toilet paper holder2' 1" |
| Tankless toilets | 3 | 13" – 16½" | 23½" – 24" | Tankless elongated toilet with exposed flush valve13" … Tankless elongated toilet with rear spud and bolt holes16½" |
Bathrooms and en-suites, cloakrooms, and the stalls of public washrooms in offices, schools, airports and restaurants. A toilet stands on the floor with its back to the wall that carries the soil pipe; a tankless toilet takes a flush valve on the wall instead of a cistern, the usual choice in busy public washrooms. The washroom above is built from blocks of this library, at real size: the toilet stalls line 9' 1" × 4' 11".
Planning numbers that work for most washrooms: toilet stalls at least 36 in (92 cm) wide and 60 in (1.52 m) deep, the toilet’s centreline in the middle of the stall; an accessible stall 60 in (1.52 m) wide, the centreline 16 to 18 in (41 to 46 cm) from the side wall; and at least 21 in (53 cm) of clear floor in front of every toilet.
The 18 toilets drawn in plan in this library measure 13½" to 2' 1" (34 cm to 63 cm) wide and 23" to 2' 4" (59 cm to 70 cm) deep. Two-piece toilets are usually 28 to 31 in (71 to 79 cm) deep; an elongated bowl is about 2 in (5 cm) longer than a round one.
A toilet without a cistern: a flush valve (flushometer) on the water supply flushes the bowl. It needs a larger supply pipe and is the usual choice in public washrooms.
At least 36 in (92 cm) wide and 60 in (1.52 m) deep for a floor-mounted toilet, and 60 in (1.52 m) wide for an accessible stall. The stalls in this library are 92 cm wide.
Yes: all 29 come with a 3D model of the toilet, with its seat, lid and flush button.
Yes. The DWG and DXF blocks import into Revit, ArchiCAD, SketchUp and any CAD program as 2D linework. The 3D models come as OBJ and GLB for Blender, 3ds Max and Twinmotion; STEP for Fusion, SolidWorks and FreeCAD; STL and 3MF for 3D printing.
Yes. Every file is free for personal and commercial work, with no account and no watermark.
Open any card above and you get these, for free and with no account:
