Lounge chair with button-tufted cushions
Free CAD block from the Living and dining room furniture library (167 blocks), drawn 1:1.
About this block
Lounge chair with button-tufted cushions, drawn in plan, front and side elevation, the front and side elevations projected from its 3D model with hidden lines removed. It measures 2' 10" wide, 2' 9" deep and 2' 7" high (86 cm × 85 cm × 80 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Living and dining room furniture library: 167 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
A near-square lounge chair for floor plans of hotel rooms, executive offices and lobby clusters, where the tufting pattern in plan distinguishes it from a plain club chair at a glance. Put it at an angle in the corner of a bedroom plan or in a row of three along a lobby wall.
Clearances to leave
Its 34 × 33 in (86 × 85 cm) footprint is wider than a 24 in (60 cm) seat allowance, so a row of them needs 39 in (100 cm) per chair with a gap. Leave 17½ in (45 cm) in front for legs, 24 in (60 cm) behind for a route and 21½–26 in (55–65 cm) beside the arm for a table.
Pairs with
Two of them facing a Rectangular coffee table with inset top, or one next to the Lounge chair with ottoman, arc lamp and round rug group; the Tripod floor lamp with drum shade behind one arm; cognac leather on a black steel base.
Common questions
What are the dimensions of this block?
It measures 2' 10" | 86 cm wide by 2' 9" | 85 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 2' 9" wide, 2' 9" deep and 2' 7" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing, as a base with backrest, arms and seat cushions at standard heights (seat 44 cm, arms 62 cm, back 80 cm). Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 2' 10" | 86 cm, depth 2' 9" | 85 cm, footprint 7.8 ft², height 2' 7" | 80 cm.
Explore at scale
How big is it?
Footprint 7.8 ft², about 0.4× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 2.81 in × 2.79 in on Letter.
In the room
Plan at real sizeAll 2 checks pass
Bedroom layout
Built around the lounge chair with button-tufted cushions, the block you are viewing.
Checks
- Legroom in front of the armchair9' 6"Minimum 17½", recommended 23½"
- Door swing to the nearest fixture16"Minimum 2", recommended 4"
Design notes
- Walkway beside the bed: 2' 0" minimum, 2' 6" recommended, 3' 0" ideal. These are the clearances drawn in the cadblock bed library.
- Keep about 2' 11" clear in front of a closet so the doors open and you can stand at it.
- Bedside tables 40 to 60 cm wide, with the top roughly level with the mattress, about 21½" to 2' 2" from the floor.
- Keep the door swing free of furniture, and avoid placing the bed in line with the door.
The kit, 3 blocks