Round dining table for six with upholstered side chairs
Free CAD block from the Living and dining room furniture library (167 blocks), drawn 1:1.
About this block
Round dining table for six with upholstered side chairs, drawn in plan, front and side elevation, the front and side elevations projected from its 3D model with hidden lines removed. It measures 7' 1" wide, 7' 3" deep and 2' 10" high (2.15 m × 2.22 m × 86 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Living and dining room furniture library: 167 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
A plan group for the dining zone of an open-plan apartment, a private dining room in a restaurant or a hotel suite, dropped straight onto the floor plan with the chairs already pulled out. The round top means no head of table, which suits a breakfast room or a meeting corner in an office.
Clearances to leave
The 7 ft 1 in × 7 ft 3 in (215 × 222 cm) footprint already includes the chairs, so add 36 in (91 cm) beyond it on every side for pulling out, or 44–48 in (112–122 cm) where a route passes behind. That means a square room of roughly 13 ft (400 cm) for six to dine without squeezing past a sideboard.
Pairs with
Center the Linear three-light pendant with cone shades over the table on the ceiling plan, leave a wall free for a sideboard to serve from, and stand the Potted plant with broad pointed leaves in the corner; a wood top on a pedestal.
Common questions
What are the dimensions of this block?
It measures 7' 1" | 2.15 m wide by 7' 3" | 2.22 m deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 7' 1" wide, 7' 3" deep and 2' 10" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing, as a top on four legs at standard height. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 7' 1" | 2.15 m, depth 7' 3" | 2.22 m, footprint 51.4 ft², height 2' 10" | 86 cm.
Explore at scale
How big is it?
Footprint 51.4 ft², about 2.7× the floor area of a twin bed.
On your sheet
At 1/2" = 1'-0" the drawing prints 3.54 in × 3.64 in on Letter.
In the room
Plan at real sizeWorks, 1 not ideal
Dining room layout
Built around the round dining table for six with upholstered side chairs, the block you are viewing.
Checks
- Behind the chairs, left side2' 1"Minimum 17½", recommended 2' 2"
- Behind the chairs, right side3' 7"Minimum 17½", recommended 2' 2"
- Behind the chairs, bottom side3' 1"Minimum 17½", recommended 2' 2"
- Behind the chairs, top side3' 5"Minimum 17½", recommended 2' 2"
- Door swing to the nearest fixture17½"Minimum 2", recommended 4"
Design notes
- Measured from the chair backs: 17½" lets a guest pull a chair out, 2' 2" lets someone walk behind a seated guest.
- From the table edge that is about 3' 0" and 3' 8".
- Allow about 23½" of table edge per person and 15½" of depth for each place setting.
- Hang a pendant 2' 4" to 2' 9" above the table top.
The kit, 3 blocks