Tapered bathtub in rectangular deck with corner cutout
Free CAD block from the Bathtubs library (54 blocks), drawn 1:1.
About this block
Tapered bathtub in rectangular deck with corner cutout, drawn in plan, front and side elevation. It measures 6' 1" wide, 3' 5" deep and 20½" high (1.85 m × 1.05 m × 51 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Bathtubs library: 54 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
The deck with a corner cut out is the detail that sets this one apart: the bowl tapers to the foot end and the notch lets the deck clear a door swing or a sink. Use it on floor plans for hotel suites and larger house bathrooms where the tub is built into a tiled platform.
Clearances to leave
A 6 ft 1 in × 3 ft 5 in (185 × 105 cm) deck is 6 in (15 cm) longer than the 67 in (170 cm) bay and the cutout gives back a corner of about 12 in (30 cm); keep 24–30 in (60–75 cm) clear along the long side and a 36 in (90 cm) door swing clear of the notch.
Pairs with
Goes with the Drop-in bathtub shell with tapered sides and rim flanges, which is how it reads in section, and the Shower slide rail with hand shower and two-handle mixer at the faucet end. A stone deck top with a tiled riser suits the cutout.
Common questions
What are the dimensions of this block?
It measures 6' 1" | 1.85 m wide by 3' 5" | 1.05 m deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 6' 1" wide, 3' 5" deep and 20" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing, in white acrylic at the usual US rim height (15 in for a rectangular alcove bath, 20 in for corner, round and deck baths): the deck or apron as the plan draws it, the bowl lofted from the rim opening down to the floor the plan draws, seats and steps where it has them, the chrome waste on the drain and the overflow on the end wall. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 6' 1" | 1.85 m, depth 3' 5" | 1.05 m, footprint 20.9 ft², height 20½" | 51 cm.
Explore at scale
How big is it?
Footprint 20.9 ft², about 1.1× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 6.07 in × 3.44 in on Letter.
In the room
Plan at real sizeAll 2 checks pass
Bathroom layout
Built around the tapered bathtub in rectangular deck with corner cutout, the block you are viewing.
Checks
- Clear floor beside the bathtub4' 11"Minimum 21", recommended 2' 6"
- Door swing to the nearest fixture8½"Minimum 2", recommended 4"
Design notes
- Toilet and bidet: center line at least 15" from a wall or fixture, 18" recommended.
- Clear floor in front of each fixture: 21" minimum, 2' 6" recommended.
- Sink rim at 2' 7" to 2' 11"; a double vanity needs about 2' 11" between faucets.
- For a wheelchair, plan a 4' 11" turning circle clear of fixtures.
- Keep the door swing at least 2" clear of every fixture, 4" recommended; in a small bathroom the door can open outward or slide.
The kit, 3 blocks