Three-leaf louvered door with knobs
Free CAD block from the Doors in elevation library (148 blocks), drawn 1:1.
About this block
Three-leaf louvered door with knobs, drawn in plan, front and side elevation, the plan and the side elevation projected from its 3D model with hidden lines removed. It measures 4' 5" wide, 5' 11" high and 8½" deep (1.35 m × 1.80 m × 22 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Doors in elevation library: 148 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Three louvered leaves at 71 in (180 cm) high are closet or cabinet doors, not a passage door. Draw them on the bedroom interior elevation across a built-in closet, or on a corridor elevation in front of a mechanical room or linen closet that needs ventilation. The knobs show which leaf is hinged where.
Clearances to leave
At 71 in (180 cm) it falls short of the 6 ft 8 in (203 cm) passage-door minimum, confirming it as a closet front. The 53 in (135 cm) width divides into three 17½ in (45 cm) leaves, each needing 17½ in (45 cm) of swing. Leave 23½ in (60 cm) in front for someone to stand and reach into the shelves.
Pairs with
Double louvered door with twin louver columns is the two-leaf version for a narrower closet. Mannequin figure with one hand resting on thigh gives the scale. White-painted louvers with a small brass knob on each leaf.
Common questions
What are the dimensions of this block?
It measures 4' 5" | 1.35 m wide by 5' 11" | 1.80 m high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 4' 5" wide, 8½" deep and 5' 11" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Shown beside a 5' 3" (1.60 m) person, both at the same scale.
3D model
Built at real size from the front drawing, from its front elevation, read as a relief: a solid frame 16 cm deep, a 4.5 cm leaf the same on both faces, moldings proud and panels sunk, panels and plank infill in a second tone, and the hardware the drawing shows (knobs, studs, pulls, strap hinges with their rivets). Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 4' 5" | 1.35 m, height 5' 11" | 1.80 m, depth 8½" | 22 cm.
Explore at scale
How big is it?
At 5' 11" high it reaches 103% of an adult's height and 86% of a door.
On your sheet
At 1/2" = 1'-0" the drawing prints 2.21 in × 2.95 in on Letter.
In the room
Elevation at real size
Street front elevation
Built around the three-leaf louvered door with knobs, the block you are viewing.
Design notes
- Street trees are usually planted 19' 8" to 32' 10" apart, at least 3' 3" from the curb.
- A parallel parking bay is about 6' 7" to 8' 2" wide and 18' 1" to 19' 8" long.
- People and cars at real size give clients an instant sense of scale in a facade drawing.
The kit, 7 blocks