Mannequin figure with hands on hips, elbows out
Free CAD block from the People in plan and front view library (50 blocks), drawn 1:1.
About this block
Mannequin figure with hands on hips, elbows out, drawn in plan view. It measures 2' 3" wide and 11" deep (67 cm × 28 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People in plan and front view library: 50 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
A standing figure in plan with the elbows thrown wide, which takes up more side-to-side room than any other standing figure here, so it is the one for checking a bar counter, a viewing gallery rail or a kitchen aisle where someone stands with hands on hips. Place it along a counter edge on a restaurant or pub layout. Plan view.
Clearances to leave
The elbows span 2 ft 3 in (67 cm) over a shallow 11 in (28 cm) body, so at a bar each of these needs 28 in (70 cm) of counter, more than the 24 in (60 cm) a tidy figure takes. Behind it keep 36 in (90 cm) for a waiter to pass, and 48 in (120 cm) where trays are carried.
Pairs with
Seen from the front, it is the Mannequin figure standing with hands on hips. Line it along a bar next to the Narrow-shouldered mannequin figure standing, arms at sides to compare footprints, and give the lounge the Curved three-seat sofa with channel-pleated back.
Common questions
What are the dimensions of this block?
It measures 2' 3" | 67 cm wide by 11" | 28 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
How much floor space does it take?
Its footprint is 2.1 ft² (0.19 m²). Leave at least 2' 11" of clear walkway on the sides people use.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 2' 3"67 cm
- Depth
- 11"28 cm
- Footprint
- 2.1 ft²0.19 m²
- View
- Plan view
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People in plan and front view
Collections
Drawing at scalePlan view
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 2' 3" | 67 cm, depth 11" | 28 cm, footprint 2.1 ft².
Explore at scale
How big is it?
Footprint 2.1 ft², about 0.1× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 2.21 in × 0.93 in on Letter.
In the room
Plan at real sizeAll 2 checks pass
Galley kitchen layout
Built around the mannequin figure with hands on hips, elbows out, the block you are viewing.
Checks
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks