Queen bed with diagonal folded duvet
Free CAD block from the Beds with clearances library (86 blocks), drawn 1:1.
About this block
Queen bed with diagonal folded duvet, drawn in plan, front and side elevation, the front and side elevations projected from its 3D model with hidden lines removed. It measures 5' 3" wide, 6' 7" deep and 3' 3" high (1.60 m × 2.00 m × 1.00 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Beds with clearances library: 86 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
The standard master-bedroom bed in apartment and house plans, a 63 in (160 cm) queen with the duvet folded on the diagonal so the open corner is obvious at a glance. Drop it into furniture layouts, model-apartment presentation plans and hotel king-twin studies. The diagonal fold also helps orient the bed when the plan is rotated on a sheet.
Clearances to leave
A queen with 24 in (60 cm) each side takes a 9 ft 2 in (280 cm) wide bay, and 30 in (75 cm) each side pushes that to 10 ft 2 in (310 cm), which is a comfortable master bedroom. Keep 36 in (90 cm) at the foot where the route to the en suite runs past the 6 ft 7 in (200 cm) length.
Pairs with
Set it between two Small square side table with inset top blocks for symmetrical bedside tables, with Chaise longue with stitched rounded arms across the foot. For a hotel layout swap in Queen bed with two pillows and double turn-down to compare pillow arrangements.
Common questions
What are the dimensions of this block?
It measures 5' 3" | 1.60 m wide by 6' 7" | 2.00 m deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 5' 3" wide, 6' 7" deep and 3' 3" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing, in layers: base, mattress, duvet, pillows and headboard. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 5' 3" | 1.60 m, depth 6' 7" | 2.00 m, footprint 34.4 ft², height 3' 3" | 1.00 m.
Explore at scale
How big is it?
Footprint 34.4 ft², about 1.8× the floor area of a twin bed.
On your sheet
At 1/2" = 1'-0" the drawing prints 2.62 in × 3.28 in on Letter.
In the room
Plan at real sizeAll 4 checks pass
Bedroom layout
Built around the queen bed with diagonal folded duvet, the block you are viewing.
Checks
- Walkway, left of the bed4' 7"Minimum 2' 0", recommended 2' 6"
- Walkway, right of the bed4' 7"Minimum 2' 0", recommended 2' 6"
- Walkway at the foot of the bed5' 11"Minimum 2' 0", recommended 2' 6"
- Door swing to the nearest fixture15"Minimum 2", recommended 4"
Design notes
- Walkway beside the bed: 2' 0" minimum, 2' 6" recommended, 3' 0" ideal. These are the clearances drawn in the cadblock bed library.
- Keep about 2' 11" clear in front of a closet so the doors open and you can stand at it.
- Bedside tables 40 to 60 cm wide, with the top roughly level with the mattress, about 21½" to 2' 2" from the floor.
- Keep the door swing free of furniture, and avoid placing the bed in line with the door.
The kit, 3 blocks