Queen bed with two pillows and double turn-down
Free CAD block from the Beds with clearances library (90 blocks), drawn 1:1.
About this block
Queen bed with two pillows and double turn-down, drawn in plan, front and side elevation, the front and side elevations projected from its 3D model with hidden lines removed. It measures 5' 3" wide, 6' 7" deep and 3' 3" high (1.60 m × 2.00 m × 1.00 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Beds with clearances library: 90 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Hotel guest rooms and extended-stay apartments where housekeeping turns both sides down, which is exactly what the double turn-down in the drawing shows. The two pillows mark it as a bed for two in a ¼ in = 1 ft (1:50) room plan. Draw it in typical-room sheets and mock-up room drawings where the bed centerline locates the headboard panel and the outlets.
Clearances to leave
Both sides are used here, so leave 24 in (60 cm) minimum and 30 in (75 cm) preferred on each, bringing the 63 in (160 cm) bed to a 9–10 ft (280–310 cm) bay. Where the bathroom door is at the foot keep 36 in (90 cm) clear of the 6 ft 7 in (200 cm) length, and allow 18 in (45 cm) per nightstand.
Pairs with
Run a desk and Slim-arm armchair with lumbar pillow along the opposite wall, and place Rectangular coffee table with inset top under the window as a luggage bench. Compare it with Queen bed with diagonal folded duvet for the same room with a single-side turn-down.
Common questions
What are the dimensions of this block?
It measures 5' 3" | 1.60 m wide by 6' 7" | 2.00 m deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 5' 3" wide, 6' 7" deep and 3' 3" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing, in layers: base, mattress, duvet, pillows and headboard. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 5' 3" | 1.60 m, depth 6' 7" | 2.00 m, footprint 34.4 ft², height 3' 3" | 1.00 m.



Explore at scale
How big is it?
Footprint 34.4 ft², about 1.8× the floor area of a twin bed.
On your sheet
At 1/2" = 1'-0" the drawing prints 2.62 in × 3.28 in on Letter.
In the room
Plan at real sizeAll 4 checks pass
Bedroom layout
Built around the queen bed with two pillows and double turn-down, the block you are viewing.
Checks
- Walkway, left of the bed4' 7"Minimum 2' 0", recommended 2' 6"
- Walkway, right of the bed4' 7"Minimum 2' 0", recommended 2' 6"
- Walkway at the foot of the bed5' 11"Minimum 2' 0", recommended 2' 6"
- Door swing to the nearest fixture15"Minimum 2", recommended 4"
Design notes
- Walkway beside the bed: 2' 0" minimum, 2' 6" recommended, 3' 0" ideal. These are the clearances drawn in the cadblock bed library.
- Keep about 2' 11" clear in front of a closet so the doors open and you can stand at it.
- Bedside tables 40 to 60 cm wide, with the top roughly level with the mattress, about 21½" to 2' 2" from the floor.
- Keep the door swing free of furniture, and avoid placing the bed in line with the door.
The kit, 5 blocks
