2 of 9
Plan, front and side elevationDWG · DXF · SVG · PNG

Table lamp with braided rope drum shade and black metal base

Free CAD block from the Table lamps library (36 blocks), drawn 1:1.

8½" × 15½"22 cm × 40 cm, width by height

About this block

Table lamp with braided rope drum shade and black metal base, drawn in plan, front and side elevation, all three projected from its 3D model so they match to the millimeter. It measures 8½" wide, 15½" high and 8½" deep (22 cm × 40 cm × 22 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.

It also comes as a 3D model built from these drawings.

From the Table lamps library: 36 blocks drawn to one standard, each one available on its own.

In practice

Author's notes

Where it goes

A bedside or desk lamp with a natural look: a round black steel base and a slim black stem carry a drum shade of thick braided paper rope, its cords running straight down between a rope-wrapped top ring and bottom ring, so the light comes through in warm stripes. Inside, a spider of two crossed rods, joined at their tips by a black ring, holds the lampholder and a large decorative globe bulb with a visible filament. It sits on a nightstand, a desk, a console or a side table beside a sofa. Use the front elevation on interior elevations at ½ in = 1 ft (1:20); in plan it reads as the circle of the shade.

Clearances to leave

The block is 8⅝ in (22 cm) across the shade and 15¾ in (40 cm) high, and the base is 5⅛ in (13 cm) across, with a push switch on its front and the cable coming in at its side. Give it a tabletop at least 12 in (30 cm) deep so the shade stays clear of the edge, and keep it about 4 in (10 cm) off a wall or headboard so the rope does not rub. Beside a bed, set it on a nightstand close to mattress height, within reach from the pillow; on a desk, put it on the side opposite the writing hand, so the hand does not shade the page. The paper rope shade calls for an LED bulb, which stays cool.

Pairs with

Two of them on matching nightstands frame a double bed, and one on a desk sits well beside a light wood chair. On a console in a hall or on a sideboard it adds a warm, natural note. The paper rope goes with oak, rattan, linen and terracotta, and the black base ties in with black metal frames, handles and legs.

Common questions

What are the dimensions of this block?

It measures 8½" | 22 cm wide by 15½" | 40 cm high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.

Is there a 3D model of this block?

Yes. A 3D model built from this block's drawings, 8½" wide, 8½" deep and 15½" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.

File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.

Details

Width
8½"22 cm
Height
15½"40 cm
Views
Plan, front and side elevation
Scale
1:1, full size
2D formats
DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
3D formats
STEP, OBJ, GLB, 3MF, STL
Library
Table lamps

Collections

Drawing at scale3 views

6"

Drawn 1:1. Scale bar for reference.

3D model

Table lamp with braided rope drum shade and black metal base, 3D model

Built at real size from the front drawing. Drag to orbit, underneath too; scroll or pinch to zoom.

Dimensions and sizes

3 views

Width 8½" | 22 cm, height 15½" | 40 cm, depth 8½" | 22 cm.

Table lamp with braided rope drum shade and black metal base, plan view, CAD blockTable lamp with braided rope drum shade and black metal base, front elevation, CAD blockTable lamp with braided rope drum shade and black metal base, side elevation, CAD block8½" | 22 cm8½" | 22 cmPlan view8½" | 22 cm15½" | 40 cmFront elevation8½" | 22 cm15½" | 40 cmSide elevation

Explore at scale

Drag, zoom, measure
8½" | 22 cm15½" | 40 cm8½" | 22 cm15½" | 40 cm8½" | 22 cm8½" | 22 cm Grid 3", bold every 12"

How big is it?

Same scale
This block15½" highA4 sheet8½" × 11½"US Letter8½" × 11"

About 1.3× the height of an A4 sheet, a size that suits detail sheets at 1:5 or 1:10.

On your sheet

Print preview
TITLETable lamp with braided rope drum shade and black …VIEWFront elevationSCALE1" = 1'-0"

At 1" = 1'-0" the drawing prints 0.72 in × 1.31 in on Letter.

In the room

Scenes built only from cadblock blocks
21½"3' 7"8' 6"612534
This blockRest of the kit

Elevation at real size

Bedroom elevation

Built around the table lamp with braided rope drum shade and black metal base, the block you are viewing.

Wall 14' 5"Ceiling 8' 6"
Try another table lamp 1 of 8

Design notes

  • A mattress top at 19½" to 23½" is comfortable to sit on and lines up with standard bedside tables.
  • Headboards usually stand 3' 3" to 3' 11" high; leave space above for a picture or a shelf.
  • A lamp on each bedside table puts the light beside the pillow; the shade's lower edge at about eye level when you sit up in bed, 3' 3" to 3' 7" from the floor, keeps the bulb out of sight.
  • Bedside pendants free the tables: hang the shade bottom about 4' 3" to 5' 9" from the floor so it lights the page when you sit up in bed.
  • The dashed outline is the bed seen from its foot. A bed in elevation is not in the library yet.

The kit, 4 blocks

More from Table lamps

All 36 blocks
Table lamp with ribbed pink glass shade and brass baseFront
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
11" × 14½"
Table lamp with black wire cage shade on an open ring baseFront
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
6" × 15"
Table lamp with black wire cage on a round beech baseFront
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
12½" × 14½"
Table lamp with cut glass barrel shade on a wood baseFront
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
8" × 12½"
Table lamp with Love filament globe bulb on a faceted wood baseFront
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
5" × 9½"
Table lamp with Hello filament globe bulb on a brass cylinder baseFront
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
5" × 10½"
Table lamp with cadblock.org filament globe bulb on a faceted brass baseFront
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
5" × 9½"
Bedside table lamp with bamboo stick shadeNewPlan
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
13½" × 6"

Goes well with

From other libraries
Small square side table with inset topPlan
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
15" × 15"
Slim-arm armchair with lumbar pillowPlan
2DDWG · DXF · SVG · PNG3DSTEP · OBJ · GLB · 3MF · STL
2' 2" × 2' 2"