Three-seat sofa with rolled arms and curved metal legs
Free CAD block from the Living and dining room furniture library (167 blocks), drawn 1:1.
About this block
Three-seat sofa with rolled arms and curved metal legs, drawn in plan, front and side elevation, the plan and the side elevation projected from its 3D model with hidden lines removed. It measures 5' 11" wide, 2' 7" high and 2' 11" deep (1.80 m × 80 cm × 90 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Living and dining room furniture library: 167 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
The curved metal legs make it a candidate for mid-century interiors, a boutique office lounge or a showroom wall, drawn on the interior elevation where the gap under the frame matters for lighting and cleaning. Compact for a three-seater, it also suits the elevation of a studio apartment beside a closet run.
Clearances to leave
Keep 15½–17½ in (40–45 cm) to the coffee table, a 36 in (90 cm) route past the front and 4 in (10 cm) at each rolled arm so it clears a wall or lamp base. Three sitters share the 71 in (180 cm) length at exactly 24 in (60 cm) apiece, so choose a coffee table no longer than 47 in (120 cm).
Pairs with
In plan use the Three-seat sofa with rolled scroll arms as its stand-in, with a Rectangular coffee table with inset top in front; a brass finish on the legs and a mustard wool cover suit the period.
Common questions
What are the dimensions of this block?
It measures 5' 11" | 1.80 m wide by 2' 7" | 80 cm high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 5' 10" wide, 2' 11" deep and 2' 7" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Shown beside a 4' 3" (1.30 m) person, both at the same scale.
3D model
Built at real size from the front drawing, as a base with backrest, arms and seat cushions at standard heights (seat 44 cm, arms 62 cm, back 80 cm). Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 5' 11" | 1.80 m, height 2' 7" | 80 cm, depth 2' 11" | 90 cm.
Explore at scale
How big is it?
At 2' 7" high it reaches 46% of an adult's height and 38% of a door.
On your sheet
At 1" = 1'-0" the drawing prints 5.89 in × 2.62 in on Letter.
In the room
Elevation at real size
Living room elevation
Built around the three-seat sofa with rolled arms and curved metal legs, the block you are viewing.
Design notes
- Hang shelves or art 12" to 23½" above the sofa back so heads clear them.
- A floor lamp beside the sofa should light the seat: its shade sits a little above a seated person's eyes.
- Keep the wall composition about two thirds of the sofa width for a balanced elevation.
The kit, 5 blocks