Two-seat pillow-back sofa on bun feet
Free CAD block from the Living and dining room furniture library (171 blocks), drawn 1:1.
About this block
Two-seat pillow-back sofa on bun feet, drawn in plan and front elevation, the plan projected from its 3D model with hidden lines removed. It measures 5' 9" wide, 2' 6" high and 2' 1" deep (1.76 m × 76 cm × 63 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Living and dining room furniture library: 171 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
A loveseat for the elevation of a small apartment, a bedroom sitting corner or a hotel room, where the loose pillow back softens an otherwise flat wall. The bun feet lift the frame so a strip of baseboard shows beneath; draw it with the side elevation Scroll-arm armchair or sofa with bun feet when the section cuts across the room.
Clearances to leave
The 69 in (176 cm) length suits a 6 ft 7 in (200 cm) alcove with a side table squeezed in. Keep 24 in (60 cm) to pass behind if it floats in the room, 15½ in (40 cm) to a coffee table, and remember the 30 in (76 cm) back reaches just above a standard 30 in (75 cm) dining or desk top behind it.
Pairs with
Set it beside the Scroll-arm armchair or sofa with bun feet side view for the matching section, then add the Small square side table with inset top at one arm and a Tub armchair with channel-pleated back and pillow opposite, in velvet.
Common questions
What are the dimensions of this block?
It measures 5' 9" | 1.76 m wide by 2' 6" | 76 cm high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 5' 9" wide, 2' 1" deep and 2' 6" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Also drawn as
Collections
Drawing at scale2 views
Shown with a person seated on it, both at the same scale.
3D model
Built at real size from the front and side drawings, as a base with backrest, arms and seat cushions at standard heights (seat 44 cm, arms 62 cm, back 80 cm). Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 5' 9" | 1.76 m, height 2' 6" | 76 cm, depth 2' 1" | 63 cm.
Explore at scale
How big is it?
At 2' 6" high it reaches 44% of an adult's height and 37% of a door.
On your sheet
At 1" = 1'-0" the drawing prints 5.77 in × 2.49 in on Letter.
In the room
Elevation at real size
Living room elevation
Built around the two-seat pillow-back sofa on bun feet, the block you are viewing.
Design notes
- Hang shelves or art 12" to 23½" above the sofa back so heads clear them.
- A floor lamp beside the sofa should light the seat: its shade sits a little above a seated person's eyes.
- Keep the wall composition about two thirds of the sofa width for a balanced elevation.
The kit, 5 blocks