Child-size round toilet with rear corrugated connector
Free CAD block from the Toilets, sinks, bidets and urinals library (102 blocks), drawn 1:1.
About this block
Child-size round toilet with rear corrugated connector, drawn in plan, front and side elevation, each view as drawn in the original library file. It measures 12½" wide, 19½" deep and 11" high (32 cm × 50 cm × 28 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Toilets, sinks, bidets and urinals library: 102 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Plan of a child-size toilet for preschool, kindergarten and elementary school layouts, where the rear corrugated connector shows the outlet going to the wall. Draw a row of them on the floor plan of the children's restroom area, with low partitions between, and copy the row onto the plumbing plan.
Clearances to leave
Rows work at 24 in (60 cm) centers, leaving 11 in (28 cm) between the 12½ in (32 cm) bowls for a partition, though 28 in (70 cm) centers give a teacher room to help. At 19½ in (50 cm) deep, 24 in (60 cm) in front makes a 43 in (110 cm) stall depth.
Pairs with
A row of four with partitions in alternating colors, and low sinks facing them, is the usual preschool layout; the front and side elevations give the low pan height for the elevation of that wall.
Common questions
What are the dimensions of this block?
It measures 12½" | 32 cm wide by 19½" | 50 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 10" wide, 18" deep and 11" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Drawn 1:1. Scale bar for reference.
3D model
Built at real size from the plan, front and side drawings. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 12½" | 32 cm, depth 19½" | 50 cm, footprint 1.7 ft², height 11" | 28 cm.
Explore at scale
How big is it?
About 1.7× the height of an A4 sheet, a size that suits detail sheets at 1:5 or 1:10.
On your sheet
At 1" = 1'-0" the drawing prints 1.05 in × 1.63 in on Letter.
In the room
Plan at real sizeAll 3 checks pass
Bathroom layout
Built around the child-size round toilet with rear corrugated connector, the block you are viewing.
Checks
- Clear floor in front of the toilet7' 7"Minimum 21", recommended 2' 6"
- Center line to the nearest wall or fixture3' 1"Minimum 15", recommended 18"
- Door swing to the nearest fixture8½"Minimum 2", recommended 4"
Design notes
- Toilet and bidet: center line at least 15" from a wall or fixture, 18" recommended.
- Clear floor in front of each fixture: 21" minimum, 2' 6" recommended.
- Sink rim at 2' 7" to 2' 11"; a double vanity needs about 2' 11" between faucets.
- For a wheelchair, plan a 4' 11" turning circle clear of fixtures.
- Keep the door swing at least 2" clear of every fixture, 4" recommended; in a small bathroom the door can open outward or slide.
The kit, 3 blocks