Tankless toilet bowl with top spud and seat hinges
Free CAD block from the Toilets, sinks, bidets and urinals library (102 blocks), drawn 1:1.
About this block
Tankless toilet bowl with top spud and seat hinges, drawn in plan, front and side elevation, each view as drawn in the original library file. It measures 14" wide, 2' 2" deep and 14" high (36 cm × 67 cm × 36 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Toilets, sinks, bidets and urinals library: 102 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Plan of a tankless bowl with the top spud and seat hinges at the wall end, for toilet layouts in offices, schools, stadiums and stations where a flushometer or concealed tank feeds the spud. Use it inside stalls on the floor plan and on the plumbing layout for the valve positions.
Clearances to leave
A narrow 14 in (36 cm) bowl leaves 8 in (20 cm) beside it at a 15 in (38 cm) centerline from the partition; standard stalls run 36 in (90 cm) wide. At 26 in (67 cm) deep, 24 in (60 cm) in front sets a 50 in (127 cm) stall depth, and an accessible stall needs 60 in (152 cm) to turn.
Pairs with
In plan, the Tankless toilet with top flush connector and hinged seat makes a comparable neighbor in the next stall; the front and side elevations show the flared rim, the seamed pedestal and the trapway.
Common questions
What are the dimensions of this block?
It measures 14" | 36 cm wide by 2' 2" | 67 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 14½" wide, 2' 2" deep and 14" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan, front and side drawings. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 14" | 36 cm, depth 2' 2" | 67 cm, footprint 2.6 ft², height 14" | 36 cm.
Explore at scale
How big is it?
Footprint 2.6 ft², about 0.1× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 1.18 in × 2.20 in on Letter.
In the room
Plan at real sizeAll 3 checks pass
Bathroom layout
Built around the tankless toilet bowl with top spud and seat hinges, the block you are viewing.
Checks
- Clear floor in front of the toilet7' 0"Minimum 21", recommended 2' 6"
- Center line to the nearest wall or fixture3' 1"Minimum 15", recommended 18"
- Door swing to the nearest fixture8"Minimum 2", recommended 4"
Design notes
- Toilet and bidet: center line at least 15" from a wall or fixture, 18" recommended.
- Clear floor in front of each fixture: 21" minimum, 2' 6" recommended.
- Sink rim at 2' 7" to 2' 11"; a double vanity needs about 2' 11" between faucets.
- For a wheelchair, plan a 4' 11" turning circle clear of fixtures.
- Keep the door swing at least 2" clear of every fixture, 4" recommended; in a small bathroom the door can open outward or slide.
The kit, 3 blocks