Tall urinal with perforated strainer and top inlet
Free CAD block from the Toilets, sinks, bidets and urinals library (102 blocks), drawn 1:1.
About this block
Tall urinal with perforated strainer and top inlet, drawn in plan, front and side elevation, each view as drawn in the original library file. It measures 18½" wide, 12" deep and 2' 1" high (47 cm × 30 cm × 65 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Toilets, sinks, bidets and urinals library: 102 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Plan of a tall urinal with a perforated strainer in the bowl and a top inlet at the wall, for restroom layouts in airports, stadiums and large offices. Place a row on the floor plan of the men's restroom, inlet to the wall, and use the same row on the plumbing plan for the flush valves.
Clearances to leave
Being 18½ in (47 cm) wide, it needs 28 in (70 cm) centers to leave 9 in (23 cm) between bowls for a 18 in (45 cm) screen. Its 12 in (30 cm) projection and 30 in (75 cm) in front make a 41 in (105 cm) aisle, 48 in (122 cm) where a line stands behind the users.
Pairs with
In plan, a row of six with the Rectangular wall-hung toilet pan without seat in the stalls opposite; the elevations show the shield-shaped bowl and the sloping front lip.
Common questions
What are the dimensions of this block?
It measures 18½" | 47 cm wide by 12" | 30 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 18½" wide, 12½" deep and 22½" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Drawn 1:1. Scale bar for reference.
3D model
Built at real size from the plan, front and side drawings. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 18½" | 47 cm, depth 12" | 30 cm, footprint 1.5 ft², height 2' 1" | 65 cm.
Explore at scale
How big is it?
About 1.0× the height of an A4 sheet, a size that suits detail sheets at 1:5 or 1:10.
On your sheet
At 1" = 1'-0" the drawing prints 1.54 in × 0.98 in on Letter.
In the room
Plan at real sizeAll 2 checks pass
Bathroom layout
Built around the tall urinal with perforated strainer and top inlet, the block you are viewing.
Checks
- Clear floor in front of the urinal8' 2"Minimum 21", recommended 2' 6"
- Door swing to the nearest fixture5½"Minimum 2", recommended 4"
Design notes
- Toilet and bidet: center line at least 15" from a wall or fixture, 18" recommended.
- Clear floor in front of each fixture: 21" minimum, 2' 6" recommended.
- Sink rim at 2' 7" to 2' 11"; a double vanity needs about 2' 11" between faucets.
- For a wheelchair, plan a 4' 11" turning circle clear of fixtures.
- Keep the door swing at least 2" clear of every fixture, 4" recommended; in a small bathroom the door can open outward or slide.
The kit, 3 blocks