D-shaped vessel sink with three-hole faucet deck
Free CAD block from the Toilets, sinks, bidets and urinals library (102 blocks), drawn 1:1.
About this block
D-shaped vessel sink with three-hole faucet deck, drawn in plan, front and side elevation, each view as drawn in the original library file. It measures 20½" wide, 17½" deep and 8½" high (53 cm × 45 cm × 22 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Toilets, sinks, bidets and urinals library: 102 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Plan of a D-shaped vessel sink with a three-hole faucet deck at the straight back edge, for floor plans of hotel bathrooms, restaurant restrooms and modern bathrooms with a vanity counter. Place it on the counter outline with the deck at the wall, and copy it to the layout plan for the faucet holes.
Clearances to leave
Give the 20½ in (53 cm) bowl a 28 in (70 cm) counter module, 8 in (20 cm) between rims for a double vanity. The 17½ in (45 cm) depth suits a 20 in (50 cm) counter; add 22–24 in (55–60 cm) in front and the vanity zone is 41–43 in (105–110 cm) from the wall.
Pairs with
In plan, group it with the Corner bathtub with whirlpool pump and central drain in a hotel suite; the elevations show the raised rim, the rear upstand and the P-trap.
Common questions
What are the dimensions of this block?
It measures 20½" | 53 cm wide by 17½" | 45 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 20½" wide, 17½" deep and 9" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Drawn 1:1. Scale bar for reference.
3D model
Built at real size from the plan, front and side drawings. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 20½" | 53 cm, depth 17½" | 45 cm, footprint 2.6 ft², height 8½" | 22 cm.
Explore at scale
How big is it?
About 1.5× the height of an A4 sheet, a size that suits detail sheets at 1:5 or 1:10.
On your sheet
At 1" = 1'-0" the drawing prints 1.73 in × 1.48 in on Letter.
In the room
Plan at real sizeWorks, 1 not ideal
Bathroom layout
Built around the d-shaped vessel sink with three-hole faucet deck, the block you are viewing.
Checks
- Clear floor in front of the sink2' 1"Minimum 21", recommended 2' 6"
- Door swing to the nearest fixture5½"Minimum 2", recommended 4"
Design notes
- Toilet and bidet: center line at least 15" from a wall or fixture, 18" recommended.
- Clear floor in front of each fixture: 21" minimum, 2' 6" recommended.
- Sink rim at 2' 7" to 2' 11"; a double vanity needs about 2' 11" between faucets.
- For a wheelchair, plan a 4' 11" turning circle clear of fixtures.
- Keep the door swing at least 2" clear of every fixture, 4" recommended; in a small bathroom the door can open outward or slide.
The kit, 3 blocks