Wall-hung urinal with round bowl and top spud
Free CAD block from the Toilets, sinks, bidets and urinals library (102 blocks), drawn 1:1.
About this block
Wall-hung urinal with round bowl and top spud, drawn in front elevation. It measures 12½" wide and 17½" high (32 cm × 44 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling. Wall-hung: rim about 23½" from the floor.
From the Toilets, sinks, bidets and urinals library: 102 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Front elevation of a wall-hung urinal with a round bowl and a top spud for an exposed flush pipe, for interior elevations of office, school, bar and stadium restrooms. Draw it in a row on the urinal wall elevation, spud at the flush line, and in cross sections through the men's restroom.
Clearances to leave
Space a row at 24–28 in (60–70 cm) centers; the 12½ in (32 cm) bowl leaves room for 18 in (45 cm) deep privacy screens between. Hang it with the rim at 24 in (60 cm), so the 17½ in (44 cm) tall bowl tops out near 41 in (104 cm); one unit at 17 in (43 cm) serves children and wheelchair users.
Pairs with
Pairs with the Wall-hung urinal with round bowl and projecting lip in profile and the Round-bowl urinal with rear inlet notch in plan; a row of four with stainless screens and the Floor-standing toilet with exposed flushometer valve in the stalls behind.
Common questions
What are the dimensions of this block?
It measures 12½" | 32 cm wide by 17½" | 44 cm high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
At what height is it installed?
Wall-hung: rim about 23½" from the floor. The drawings above show it at that height beside a person, so the clearance reads at a glance.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 12½"32 cm
- Height
- 17½"44 cm
- Mounting height
- 16½" to the undersideWall-hung, rim about 23½" from the floor
- View
- Front elevation
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- Toilets, sinks, bidets and urinals
Also drawn as
Collections
Drawing at scaleFront elevation
Wall-hung, rim about 23½" from the floor: drawn 1:1 at its mounting height. Shown beside a 5' 9" (1.75 m) person, both at the same scale.
Dimensions and sizes
Width 12½" | 32 cm, height 17½" | 44 cm, wall-hung with the underside at 16½" | 42 cm.
Explore at scale
How big is it?
Wall-hung with its top at 2' 10", which is 50% of an adult's height.
On your sheet
At 1" = 1'-0" the drawing prints 1.05 in × 1.44 in on Letter.
In the room
Elevation at real sizeAll 2 checks pass
Bathroom elevation
Built around the wall-hung urinal with round bowl and top spud, the block you are viewing.
Checks
- Sink rim2' 10"Recommended 2' 7" to 2' 11"
- Shower slide bar top6' 9"Recommended 6' 5" to 7' 1"
Design notes
- Sink rim at 2' 7" to 2' 11" suits most adults (2' 10" at most where it must be accessible).
- Mount the shower slide bar so its top bracket sits around 6' 5" to 7' 1".
- Leave 8" between a sink and a toilet tank so both can be cleaned.
The kit, 6 blocks