Compact sink with gooseneck faucet and P-trap
Free CAD block from the Kitchen sinks library (155 blocks), drawn 1:1.
About this block
Compact sink with gooseneck faucet and P-trap, drawn in front elevation. It measures 19½" wide and 2' 10" high (50 cm × 86 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling. Set into the countertop: countertop at 2' 11".
From the Kitchen sinks library: 155 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
A 19½ in (50 cm) wide bowl with its P-trap drawn is the small-kitchen elevation: a studio apartment kitchenette, a staff room coffee station, a laboratory prep bench or a mudroom utility corner. Put it on the interior elevation of the short wall and on the drainage detail, where the trap position tells the installer where the drain outlet goes.
Clearances to leave
The narrow 19½ in (50 cm) width lets it sit in a 24 in (60 cm) base cabinet with a little counter either side, though one 18 in (46 cm) landing is still worth keeping. The 34 in (86 cm) height from spout to trap suits a 36 in (91 cm) countertop and leaves a wall cabinet at 54 in (137 cm) clear.
Pairs with
Match it with Compact single-bowl sink with centered drain in plan and Tabletop two-burner gas stove with straight front on the counter beside it. A single bowl under a short run of open shelving keeps a kitchenette elevation simple.
Common questions
What are the dimensions of this block?
It measures 19½" | 50 cm wide by 2' 10" | 86 cm high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
At what height is it installed?
Set into the countertop: countertop at 2' 11". The drawings above show it at that height beside a person, so the clearance reads at a glance.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 19½"50 cm
- Height
- 2' 10"86 cm
- Mounting height
- 20½" to the undersideSet into the countertop, countertop at 2' 11"
- View
- Front elevation
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- Kitchen sinks
Collections
Drawing at scaleFront elevation
Set into the countertop, countertop at 2' 11": drawn 1:1 at its mounting height. Shown beside a 5' 7" (1.69 m) person, both at the same scale.
Dimensions and sizes
Width 19½" | 50 cm, height 2' 10" | 86 cm, set into the countertop with the underside at 20½" | 52 cm.
Explore at scale
How big is it?
Set into the countertop with its top at 4' 6", which is 79% of an adult's height.
On your sheet
At 1" = 1'-0" the drawing prints 1.64 in × 2.82 in on Letter.