Gooseneck kitchen faucet with side lever
Free CAD block from the Kitchen sinks library (155 blocks), drawn 1:1.
About this block
Gooseneck kitchen faucet with side lever, drawn in side elevation. It measures 11½" wide and 17½" high (29 cm × 45 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling. On the countertop: countertop at 2' 11".
From the Kitchen sinks library: 155 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Drawn in side view with the lever sticking out to the side, this faucet goes into kitchen sections and the side elevation of a peninsula, where the reach of the spout over the bowl is what the drawing has to prove. It is also the right block for a faucet schedule or an enlarged fixture detail.
Clearances to leave
The spout reaches 11½ in (29 cm) from the base, so the bowl center should be about that far from the faucet hole, and the 17½ in (45 cm) rise needs a wall cabinet underside at 54 in (137 cm) when the countertop is at 36 in (91 cm). Leave the backsplash a hand's width behind the base so the lever can swing.
Pairs with
Its front elevation is Single-lever gooseneck faucet with round knob, and in plan the matching block is Single-lever kitchen faucet with round base. Set it over Large single-bowl sink in square rim for a tall-spout single bowl.
Common questions
What are the dimensions of this block?
It measures 11½" | 29 cm wide by 17½" | 45 cm high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
At what height is it installed?
On the countertop: countertop at 2' 11". The drawings above show it at that height beside a person, so the clearance reads at a glance.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 11½"29 cm
- Height
- 17½"45 cm
- Mounting height
- 2' 11" to the undersideOn the countertop, countertop at 2' 11"
- View
- Side elevation
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- Kitchen sinks
Also drawn as
Collections
Drawing at scaleSide elevation
On the countertop, countertop at 2' 11": drawn 1:1 at its mounting height. Shown beside a 5' 7" (1.69 m) person, both at the same scale.
Dimensions and sizes
Width 11½" | 29 cm, height 17½" | 45 cm, on the countertop with the underside at 2' 11" | 90 cm.
Explore at scale
How big is it?
On the countertop with its top at 4' 5", which is 78% of an adult's height.
On your sheet
At 1" = 1'-0" the drawing prints 0.95 in × 1.48 in on Letter.
In the room
Elevation at real sizeAll 2 checks pass
Kitchen elevation
Built around the gooseneck kitchen faucet with side lever, the block you are viewing.
Checks
- Countertop2' 11"Recommended 2' 11" to 3' 2"
- Hood above the cooktop2' 4"Recommended 2' 2" to 2' 6"
Design notes
- Countertop at 2' 11"; tall cooks are happier at 3' 1".
- Hood 2' 2" to 2' 6" above a gas cooktop, 21½" to 2' 2" above induction.
- Wall cabinets start 19½" to 23½" above the countertop.
- Leave at least 15½" of countertop on each side of the cooktop.
The kit, 7 blocks