Freestanding gas range with grates and drawer
Free CAD block from the Ranges and cooktops library (144 blocks), drawn 1:1.
About this block
Freestanding gas range with grates and drawer, drawn in plan, front and side elevation, all three projected from its 3D model so they match to the millimeter. It measures 23" wide, 3' 0" high and 2' 1" deep (59 cm × 91 cm × 65 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Ranges and cooktops library: 144 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
The common 24 in (60 cm) freestanding range, drawn with its grates on top and a drawer under the oven, for elevations of rental apartments, family kitchens and small houses. Its 36 in (92 cm) height puts the grates just above countertop height. Set it between two base cabinets on the cooking-wall elevation or in a section through the run.
Clearances to leave
Slot it into a 24 in (60 cm) gap between base cabinets, never hard against a tall cabinet. The top sits at 36 in (92 cm), slightly above countertop height, so the hood goes 24–30 in (61–76 cm) above the grates and the aisle in front stays at 42–48 in (107–122 cm).
Pairs with
Works with the Pyramid chimney range hood above and the Dishwasher with grooved front panel on the next bay, with the surrounding cabinets in a flat white laminate and a plain tiled backsplash.
Common questions
What are the dimensions of this block?
It measures 23" | 59 cm wide by 3' 0" | 91 cm high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 23" wide, 2' 1" deep and 3' 0" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Shown beside a 5' 7" (1.69 m) person, both at the same scale.
3D model
Built at real size from the front drawing, as a freestanding range: plinth or feet, an oven with a black glass door, its window and bar handle, a steel control panel with knobs, and the cooktop with burners under cast-iron grates. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 23" | 59 cm, height 3' 0" | 91 cm, depth 2' 1" | 65 cm.
Explore at scale
How big is it?
At 3' 0" high it reaches 52% of an adult's height and 44% of a door.
On your sheet
At 1" = 1'-0" the drawing prints 1.94 in × 2.99 in on Letter.
In the room
Elevation at real sizeAll 2 checks pass
Kitchen elevation
Built around the freestanding gas range with grates and drawer, the block you are viewing.
Checks
- Countertop2' 11"Recommended 2' 11" to 3' 2"
- Hood above the cooktop2' 4"Recommended 2' 2" to 2' 6"
Design notes
- Countertop at 2' 11"; tall cooks are happier at 3' 1".
- Hood 2' 2" to 2' 6" above a gas cooktop, 21½" to 2' 2" above induction.
- Wall cabinets start 19½" to 23½" above the countertop.
- Leave at least 15½" of countertop on each side of the cooktop.
The kit, 7 blocks