Sink bowl with rim and drain tailpiece
Free CAD block from the Kitchen sinks library (155 blocks), drawn 1:1.
About this block
Sink bowl with rim and drain tailpiece, drawn in front elevation. It measures 19½" wide and 15" high (50 cm × 39 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling. Set into the countertop: countertop at 2' 11".
From the Kitchen sinks library: 155 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
No faucet, just the bowl, its rim and the tailpiece below: this elevation is the drainage detail block. Put it in a plumbing section where the trap connection is being laid out, in the elevation of a base cabinet with the door removed, or under a separately drawn faucet on a kitchen wall elevation.
Clearances to leave
The bowl is 19½ in (50 cm) wide and 15½ in (39 cm) deep to the tailpiece end, so it fits a 24 in (60 cm) base cabinet with the drain above the toe kick. Hang it from a 36 in (91 cm) countertop with 24 in (61 cm) of counter on one side, 18 in (46 cm) on the other; keep a cabinet door clear of the tailpiece.
Pairs with
Add Single-lever gooseneck faucet with round knob above it, or Gooseneck kitchen faucet with side lever in a section, and use Compact single-bowl sink with centered drain as the plan. Two bowls side by side at 24 in (60 cm) centers make a wash-and-rinse elevation.
Common questions
What are the dimensions of this block?
It measures 19½" | 50 cm wide by 15" | 39 cm high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
At what height is it installed?
Set into the countertop: countertop at 2' 11". The drawings above show it at that height beside a person, so the clearance reads at a glance.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 19½"50 cm
- Height
- 15"39 cm
- Mounting height
- 20" to the undersideSet into the countertop, countertop at 2' 11"
- View
- Front elevation
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- Kitchen sinks
Collections
Drawing at scaleFront elevation
Set into the countertop, countertop at 2' 11": drawn 1:1 at its mounting height. Shown beside a 5' 7" (1.69 m) person, both at the same scale.
Dimensions and sizes
Width 19½" | 50 cm, height 15" | 39 cm, set into the countertop with the underside at 20" | 51 cm.
Explore at scale
How big is it?
Set into the countertop with its top at 2' 11", which is 52% of an adult's height.
On your sheet
At 1" = 1'-0" the drawing prints 1.64 in × 1.27 in on Letter.