Double-bowl sink with equal rounded bowls
Free CAD block from the Kitchen sinks library (155 blocks), drawn 1:1.
About this block
Double-bowl sink with equal rounded bowls, drawn in plan, front and side elevation, all three projected from its 3D model so they match to the millimeter. It measures 2' 8" wide, 18½" deep and 12" high (82 cm × 47 cm × 30 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Kitchen sinks library: 155 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Two rounded bowls of equal size are the classic wash-and-rinse pair, which is why this plan block suits a kitchen where no dishwasher is planned: a vacation rental, student housing, a church hall kitchen or a small cafe back room. Drop it on the floor plan and the countertop layout, usually under the window.
Clearances to leave
Give the 32 in (82 cm) sink a 36 in (90 cm) base cabinet and keep a 24 in (61 cm) drainage landing on at least one side for a dish rack. The bowls are 18 in (46 cm) deep front to back, so a 25 in (64 cm) countertop keeps a ledge for the faucet; aisle in front 42–48 in (107–122 cm).
Pairs with
Rounded double-bowl sink with swivel faucet in the appliances library is the near twin with a faucet already drawn; add Narrow tapered swivel faucet spout to this one. Put Scrolled dish rack with plates and cups on the wall above in the elevation.
Common questions
What are the dimensions of this block?
It measures 2' 8" | 82 cm wide by 18½" | 47 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 2' 8" wide, 18½" deep and 12" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing, as pressed stainless sheet: the plate and every bowl with sloped walls, the strainer where the plan has its drain, the overflow on the back wall and the waste below; drainers, upstands and faucets where the drawing has them. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 2' 8" | 82 cm, depth 18½" | 47 cm, footprint 4.1 ft², height 12" | 30 cm.
Explore at scale
How big is it?
Footprint 4.1 ft², about 0.2× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 2.70 in × 1.53 in on Letter.
In the room
Plan at real sizeAll 3 checks pass
Galley kitchen layout
Built around the double-bowl sink with equal rounded bowls, the block you are viewing.
Checks
- Aisle in front of the sink4' 5"Minimum 3' 3", recommended 3' 6"
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks