Round-bowl urinal with rear inlet notch
Free CAD block from the Toilets, sinks, bidets and urinals library (102 blocks), drawn 1:1.
About this block
Round-bowl urinal with rear inlet notch, drawn in plan view. It measures 12½" wide and 12" deep (32 cm × 30 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the Toilets, sinks, bidets and urinals library: 102 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Plan of a round-bowl urinal with a rear inlet notch at the wall, for toilet layouts in offices, schools, bars and sports halls. Draw a row on the floor plan of the men's restroom, notch to the wall, with privacy screens between, and copy the row onto the plumbing plan for the flush pipes.
Clearances to leave
Set the row at 24–28 in (60–70 cm) centers, which leaves 11–15 in (28–38 cm) between the 12½ in (32 cm) bowls for 18 in (45 cm) deep screens. The 12 in (30 cm) projection plus 30 in (75 cm) in front sets the aisle at 41 in (105 cm) from the wall.
Pairs with
Pairs with the Wall-hung urinal with round bowl and top spud and the Wall-hung urinal with round bowl and projecting lip in elevation; in plan, a row of three with the Tankless toilet bowl with top spud and seat hinges in the stalls behind.
Common questions
What are the dimensions of this block?
It measures 12½" | 32 cm wide by 12" | 30 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
How much floor space does it take?
Its footprint is 1.0 ft² (0.10 m²). Leave at least 2' 11" of clear walkway on the sides people use.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 12½"32 cm
- Depth
- 12"30 cm
- Footprint
- 1.0 ft²0.10 m²
- View
- Plan view
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- Toilets, sinks, bidets and urinals
Also drawn as
Collections
Drawing at scalePlan view
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 12½" | 32 cm, depth 12" | 30 cm, footprint 1.0 ft².
Explore at scale
How big is it?
About 1.0× the height of an A4 sheet, a size that suits detail sheets at 1:5 or 1:10.
On your sheet
At 1" = 1'-0" the drawing prints 1.05 in × 0.98 in on Letter.
In the room
Plan at real sizeAll 2 checks pass
Bathroom layout
Built around the round-bowl urinal with rear inlet notch, the block you are viewing.
Checks
- Clear floor in front of the urinal8' 2"Minimum 21", recommended 2' 6"
- Door swing to the nearest fixture8½"Minimum 2", recommended 4"
Design notes
- Toilet and bidet: center line at least 15" from a wall or fixture, 18" recommended.
- Clear floor in front of each fixture: 21" minimum, 2' 6" recommended.
- Sink rim at 2' 7" to 2' 11"; a double vanity needs about 2' 11" between faucets.
- For a wheelchair, plan a 4' 11" turning circle clear of fixtures.
- Keep the door swing at least 2" clear of every fixture, 4" recommended; in a small bathroom the door can open outward or slide.
The kit, 3 blocks