Two-piece toilet with tapered bowl and round seat
Free CAD block from the Toilets, sinks, bidets and urinals library (102 blocks), drawn 1:1.
About this block
Two-piece toilet with tapered bowl and round seat, drawn in plan, front and side elevation, each view as drawn in the original library file. It measures 21" wide, 2' 7" deep and 2' 1" high (54 cm × 78 cm × 64 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Toilets, sinks, bidets and urinals library: 102 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Plan of a long two-piece toilet with a tapered bowl and a round seat, for floor plans of family bathrooms and hotel rooms where the extra bowl length is wanted. Place it against the wall in the layout with the tank end on the wall line; it also goes on the plumbing plan for the outlet layout.
Clearances to leave
At 31 in (78 cm) deep, the longest bowl in the library, it needs 54 in (138 cm) from the back wall to keep 24 in (60 cm) in front, or 60 in (153 cm) for 30 in (75 cm). Width of 21 in (54 cm) asks for a 18 in (45 cm) centerline offset from the side wall.
Pairs with
In plan, add the Pedestal sink with semicircular front and three faucet holes and the Short rectangular bathtub with rounded bowl; its front and side elevations go on the elevation of the same wall.
Common questions
What are the dimensions of this block?
It measures 21" | 54 cm wide by 2' 7" | 78 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 20" wide, 2' 6" deep and 2' 2" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan, front and side drawings. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 21" | 54 cm, depth 2' 7" | 78 cm, footprint 4.5 ft², height 2' 1" | 64 cm.
Explore at scale
How big is it?
Footprint 4.5 ft², about 0.2× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 1.76 in × 2.54 in on Letter.
In the room
Plan at real sizeAll 3 checks pass
Bathroom layout
Built around the two-piece toilet with tapered bowl and round seat, the block you are viewing.
Checks
- Clear floor in front of the toilet6' 8"Minimum 21", recommended 2' 6"
- Center line to the nearest wall or fixture3' 1"Minimum 15", recommended 18"
- Door swing to the nearest fixture4½"Minimum 2", recommended 4"
Design notes
- Toilet and bidet: center line at least 15" from a wall or fixture, 18" recommended.
- Clear floor in front of each fixture: 21" minimum, 2' 6" recommended.
- Sink rim at 2' 7" to 2' 11"; a double vanity needs about 2' 11" between faucets.
- For a wheelchair, plan a 4' 11" turning circle clear of fixtures.
- Keep the door swing at least 2" clear of every fixture, 4" recommended; in a small bathroom the door can open outward or slide.
The kit, 3 blocks