Man in shirt and tie sitting upright, arm forward
Free CAD block from the People seated and standing library (54 blocks), drawn 1:1.
About this block
Man in shirt and tie sitting upright, arm forward, drawn in side elevation. It measures 2' 10" wide and 5' 5" high (87 cm × 1.66 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People seated and standing library: 54 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Upright on a tall chair with an arm pushed forward, he is the figure for a desk in an office section, a bar stool elevation, a reception counter cut in section or a drafting stool in a studio. Sit him at a desk in a section so the forward arm lands on the keyboard and the desk top sits level with the elbow.
Clearances to leave
His seated height of 65 in (166 cm) implies a higher perch than a 18 in (45 cm) chair, closer to a 26–30 in (65–75 cm) bar stool, so the counter in front should be 36–43 in (90–110 cm) high. The forward arm makes him 34 in (87 cm) deep, which is roughly the 40 in (100 cm) to leave behind an office chair.
Pairs with
Face him over a counter toward the Man in shirt and tie offering a handshake from the related library, or sit him at a desk opposite the Woman with hair bun seated upright, arm forward. In plan the Seated person with both forearms reaching forward is the match.
Common questions
What are the dimensions of this block?
It measures 2' 10" | 87 cm wide by 5' 5" | 1.66 m high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 2' 10"87 cm
- Height
- 5' 5"1.66 m
- View
- Side elevation
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People seated and standing
Collections
Drawing at scaleSide elevation
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 2' 10" | 87 cm, height 5' 5" | 1.66 m.
Explore at scale
How big is it?
Figure height 5' 5", shown beside an interior door.
On your sheet
At 1/2" = 1'-0" the drawing prints 1.43 in × 2.72 in on Letter.
In the room
Elevation at real size
Street front elevation
Built around the man in shirt and tie sitting upright, arm forward, the block you are viewing.
Design notes
- Street trees are usually planted 19' 8" to 32' 10" apart, at least 3' 3" from the curb.
- A parallel parking bay is about 6' 7" to 8' 2" wide and 18' 1" to 19' 8" long.
- People and cars at real size give clients an instant sense of scale in a facade drawing.
The kit, 7 blocks