Seated mannequin figure, hands resting near knees
Free CAD block from the People seated and standing library (54 blocks), drawn 1:1.
About this block
Seated mannequin figure, hands resting near knees, drawn in plan view. It measures 19" wide and 2' 4" deep (48 cm × 72 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People seated and standing library: 54 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
The standard seated plan figure: a person on a chair with hands near the knees, the one to put on every chair in a dining layout, a classroom plan, a waiting room or an auditorium. Place it on each chair around a table or along a row of seats, and leave it off empty chairs to show occupancy.
Clearances to leave
The figure takes 19 by 28 in (48 by 72 cm) with the chair, so a dining table needs 24 in (61 cm) of edge per place and 36 in (91 cm) from the table edge to the wall for the chair to pull out. Where someone passes behind, widen that to 44–48 in (112–122 cm).
Pairs with
Put it on the seats of the Three-seat sofa with rounded track arms and on the chairs around a table, and draw the Mannequin figure seated with one forearm across lap in the section. Four around a 36 in (90 cm) round table set a café plan.
Common questions
What are the dimensions of this block?
It measures 19" | 48 cm wide by 2' 4" | 72 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
How much floor space does it take?
Its footprint is 3.7 ft² (0.34 m²). Leave at least 2' 11" of clear walkway on the sides people use.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 19"48 cm
- Depth
- 2' 4"72 cm
- Footprint
- 3.7 ft²0.34 m²
- View
- Plan view
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People seated and standing
Collections
Drawing at scalePlan view
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 19" | 48 cm, depth 2' 4" | 72 cm, footprint 3.7 ft².
Explore at scale
How big is it?
Footprint 3.7 ft², about 0.2× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 1.57 in × 2.35 in on Letter.
In the room
Plan at real sizeAll 2 checks pass
Galley kitchen layout
Built around the seated mannequin figure, hands resting near knees, the block you are viewing.
Checks
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks