Seated mannequin figure with legs stretched forward
Free CAD block from the People seated and standing library (54 blocks), drawn 1:1.
About this block
Seated mannequin figure with legs stretched forward, drawn in plan view. It measures 23" wide and 3' 3" deep (59 cm × 99 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People seated and standing library: 54 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Legs stretched forward in plan is a person on a recliner, a sun lounger, a beach chair or a lounge chair with an ottoman, so it goes on pool deck plans, movie theater VIP rows, living-room layouts with a footstool and a hotel lounge. Draw it on a recliner in a home theater plan or a lounge chair in a hotel plan.
Clearances to leave
The stretched legs make the block 39 in (99 cm) long, so a coffee table should sit at least 18 in (45 cm) past the feet, and the aisle in front of a recliner row needs 36 in (90 cm) beyond that. Its 23 in (59 cm) width suits a 24 in (60 cm) lounger.
Pairs with
Set it on the Chaise longue with stitched rounded arms or the Narrow chaise longue with partial side backrest, and draw the Man in shirt and tie reclining with legs crossed in the section. On a pool deck mix it with the lying figure on alternate loungers.
Common questions
What are the dimensions of this block?
It measures 23" | 59 cm wide by 3' 3" | 99 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
How much floor space does it take?
Its footprint is 6.3 ft² (0.58 m²). Leave at least 2' 11" of clear walkway on the sides people use.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 23"59 cm
- Depth
- 3' 3"99 cm
- Footprint
- 6.3 ft²0.58 m²
- View
- Plan view
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People seated and standing
Collections
Drawing at scalePlan view
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 23" | 59 cm, depth 3' 3" | 99 cm, footprint 6.3 ft².
Explore at scale
How big is it?
Footprint 6.3 ft², about 0.3× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 1.93 in × 3.25 in on Letter.
In the room
Plan at real sizeAll 2 checks pass
Galley kitchen layout
Built around the seated mannequin figure with legs stretched forward, the block you are viewing.
Checks
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks