Seated mannequin figure with arms reaching to knees
Free CAD block from the People seated and standing library (54 blocks), drawn 1:1.
About this block
Seated mannequin figure with arms reaching to knees, drawn in plan view. It measures 19½" wide and 23½" deep (50 cm × 60 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People seated and standing library: 54 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Arms reaching down to the knees in plan is a compact sitter, suited to tight seats: movie theater rows, bus and train layouts, lecture hall plans and stadium seating. Use it where the seat pitch is tight and the figure must not spill into the row in front, like a movie theater plan or a motorcoach layout.
Clearances to leave
Only 24 in (60 cm) deep, the figure fits an 33–36 in (85–90 cm) movie theater row pitch with 10 in (25 cm) left for feet, and at 20 in (50 cm) wide it suits a 20 in (52 cm) seat. In a lecture hall allow a 18 in (45 cm) deep writing ledge in front.
Pairs with
Fill a movie theater plan with this and the Seated mannequin figure, hands resting near knees in alternate rows, and use the Mannequin figure seated upright, hands on knees for the section. Pairs of two on the Shallow two-seat sofa with curved back corners fit a foyer.
Common questions
What are the dimensions of this block?
It measures 19½" | 50 cm wide by 23½" | 60 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
How much floor space does it take?
Its footprint is 3.2 ft² (0.30 m²). Leave at least 2' 11" of clear walkway on the sides people use.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 19½"50 cm
- Depth
- 23½"60 cm
- Footprint
- 3.2 ft²0.30 m²
- View
- Plan view
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People seated and standing
Collections
Drawing at scalePlan view
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 19½" | 50 cm, depth 23½" | 60 cm, footprint 3.2 ft².
Explore at scale
How big is it?
Footprint 3.2 ft², about 0.2× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 1.64 in × 1.97 in on Letter.
In the room
Plan at real sizeAll 2 checks pass
Galley kitchen layout
Built around the seated mannequin figure with arms reaching to knees, the block you are viewing.
Checks
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks