Mannequin figure with hands on hip and thigh
Free CAD block from the People seated and standing library (54 blocks), drawn 1:1.
About this block
Mannequin figure with hands on hip and thigh, drawn in front elevation. It measures 22½" wide and 5' 9" high (57 cm × 1.76 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People seated and standing library: 54 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
One hand on the hip and the other resting on the thigh give a relaxed, waiting pose, so it suits waiting areas in a section: an airport gate, a clinic corridor, a bus shelter elevation. Put it in front of a bench in the section or beside a ticket machine on an interior elevation to make the machine's height legible.
Clearances to leave
The bent elbow pushes the width out to 22½ in (57 cm), close to the 24 in (60 cm) the fact sheet gives for a seated person side by side, so pair it with a 48 in (120 cm) corridor if another figure passes behind. At 5 ft 9 in (176 cm) tall, the hip sits around 36 in (90 cm), the same as a countertop edge.
Pairs with
Set it across from the Mannequin figure standing with feet turned outward for a two-person conversation in a section, with the Mannequin figure with elbows out, hands at hips as the plan version. A row of three in front of a bar counter shows line depth.
Common questions
What are the dimensions of this block?
It measures 22½" | 57 cm wide by 5' 9" | 1.76 m high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 22½"57 cm
- Height
- 5' 9"1.76 m
- View
- Front elevation
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People seated and standing
Collections
Drawing at scaleFront elevation
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 22½" | 57 cm, height 5' 9" | 1.76 m.
Explore at scale
How big is it?
Figure height 5' 9", shown beside an interior door.
On your sheet
At 1/2" = 1'-0" the drawing prints 0.94 in × 2.90 in on Letter.
In the room
Elevation at real size
Street front elevation
Built around the mannequin figure with hands on hip and thigh, the block you are viewing.
Design notes
- Street trees are usually planted 19' 8" to 32' 10" apart, at least 3' 3" from the curb.
- A parallel parking bay is about 6' 7" to 8' 2" wide and 18' 1" to 19' 8" long.
- People and cars at real size give clients an instant sense of scale in a facade drawing.
The kit, 7 blocks