Broad-shouldered mannequin figure standing, arms at sides
Free CAD block from the People seated and standing library (54 blocks), drawn 1:1.
About this block
Broad-shouldered mannequin figure standing, arms at sides, drawn in plan view. It measures 17" wide and 11" deep (43 cm × 28 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People seated and standing library: 54 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
The basic plan figure: a head and shoulders footprint for standing people in floor plans of elevators, lines, platforms, lecture halls and foyers. Dot it along a ticket line, inside an elevator car to count occupants, or in front of a reception desk on a lobby plan, anywhere a count of standing people matters more than a pose.
Clearances to leave
Its 17 by 11 in (43 by 28 cm) outline is the footprint of a person standing still, so a 24 in (60 cm) line spacing leaves a gap between figures and a 36 in (90 cm) corridor fits one with margin. In an elevator car, allow 20 by 24 in (50 by 60 cm) per person around this block for a realistic load.
Pairs with
Fill an elevator plan with the Mannequin figure with elbows out, hands at hips scattered among copies of this one, and use the Mannequin figure standing with feet turned outward as the section twin. A staggered grid of these at 24 in (60 cm) shows a crowd.
Common questions
What are the dimensions of this block?
It measures 17" | 43 cm wide by 11" | 28 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
How much floor space does it take?
Its footprint is 1.3 ft² (0.12 m²). Leave at least 2' 11" of clear walkway on the sides people use.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 17"43 cm
- Depth
- 11"28 cm
- Footprint
- 1.3 ft²0.12 m²
- View
- Plan view
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People seated and standing
Collections
Drawing at scalePlan view
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 17" | 43 cm, depth 11" | 28 cm, footprint 1.3 ft².
Explore at scale
How big is it?
About 1.0× the height of an A4 sheet, a size that suits detail sheets at 1:5 or 1:10.
On your sheet
At 1" = 1'-0" the drawing prints 1.40 in × 0.93 in on Letter.
In the room
Plan at real sizeAll 2 checks pass
Galley kitchen layout
Built around the broad-shouldered mannequin figure standing, arms at sides, the block you are viewing.
Checks
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks