Mannequin figure standing with feet turned outward
Free CAD block from the People seated and standing library (54 blocks), drawn 1:1.
About this block
Mannequin figure standing with feet turned outward, drawn in front elevation. It measures 15½" wide and 5' 9" high (40 cm × 1.76 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People seated and standing library: 54 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
The most neutral standing figure in the set, with feet turned out and arms relaxed, so it suits any section or interior elevation that simply needs a height reference: a lobby wall, an elevator car, a classroom, a store window. Stand it against a datum wall in the section or in front of a reception desk on the interior elevation.
Clearances to leave
Only 15½ in (40 cm) across the shoulders, this one slots into a 36 in (90 cm) single-file corridor with 10 in (25 cm) to spare each side. Its 5 ft 9 in (176 cm) stature puts the eye line at roughly 65 in (165 cm), a useful marker for signage height, picture rails and the top of a glazed partition on an interior elevation.
Pairs with
Line it up beside the Mannequin figure with hands on hip and thigh and the Mannequin figure walking with arms at sides from the related library to vary a crowd, and use the Broad-shouldered mannequin figure standing, arms at sides as its plan counterpart.
Common questions
What are the dimensions of this block?
It measures 15½" | 40 cm wide by 5' 9" | 1.76 m high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 15½"40 cm
- Height
- 5' 9"1.76 m
- View
- Front elevation
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People seated and standing
Collections
Drawing at scaleFront elevation
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 15½" | 40 cm, height 5' 9" | 1.76 m.
Explore at scale
How big is it?
Figure height 5' 9", shown beside an interior door.
On your sheet
At 1/2" = 1'-0" the drawing prints 0.65 in × 2.88 in on Letter.
In the room
Elevation at real size
Street front elevation
Built around the mannequin figure standing with feet turned outward, the block you are viewing.
Design notes
- Street trees are usually planted 19' 8" to 32' 10" apart, at least 3' 3" from the curb.
- A parallel parking bay is about 6' 7" to 8' 2" wide and 18' 1" to 19' 8" long.
- People and cars at real size give clients an instant sense of scale in a facade drawing.
The kit, 7 blocks