Mannequin figure raising knee, arm across chest
Free CAD block from the People seated and standing library (54 blocks), drawn 1:1.
About this block
Mannequin figure raising knee, arm across chest, drawn in front elevation. It measures 23½" wide and 5' 8" high (60 cm × 1.73 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People seated and standing library: 54 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Without the swimsuit, this raised-knee figure goes anywhere a lively pose helps: a gym section, a dance studio elevation, a school playground facade, a stair section where someone is climbing. Stand it on a step in a stair section with the raised knee landing on the tread above, or in front of a mirror wall on a studio interior elevation.
Clearances to leave
Lifting the knee spreads the silhouette to 23½ in (60 cm), so a stair of 36–40 in (91–100 cm) is the minimum where this figure appears; the knee height matches a pair of 7 in (17.8 cm) risers. Its 5 ft 8 in (173 cm) height reads just under the 5 ft 9 in (174 cm) standard, close enough to use as the default scale figure.
Pairs with
Group it with the Mannequin figure carrying jacket over shoulder and the Mannequin figure waving with other arm across waist from the related library for a gymnasium section with three different poses, and use the Mannequin figure with arms and legs splayed as its plan twin.
Common questions
What are the dimensions of this block?
It measures 23½" | 60 cm wide by 5' 8" | 1.73 m high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 23½"60 cm
- Height
- 5' 8"1.73 m
- View
- Front elevation
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People seated and standing
Collections
Drawing at scaleFront elevation
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 23½" | 60 cm, height 5' 8" | 1.73 m.
Explore at scale
How big is it?
Figure height 5' 8", shown beside an interior door.
On your sheet
At 1/2" = 1'-0" the drawing prints 0.98 in × 2.83 in on Letter.
In the room
Elevation at real size
Street front elevation
Built around the mannequin figure raising knee, arm across chest, the block you are viewing.
Design notes
- Street trees are usually planted 19' 8" to 32' 10" apart, at least 3' 3" from the curb.
- A parallel parking bay is about 6' 7" to 8' 2" wide and 18' 1" to 19' 8" long.
- People and cars at real size give clients an instant sense of scale in a facade drawing.
The kit, 7 blocks