Mobile cart with end panel at rear
Free CAD block from the Commercial kitchen and buffets library (96 blocks), drawn 1:1.
About this block
Mobile cart with end panel at rear, drawn in plan, front and side elevation. It measures 2' 2" wide, 3' 3" deep and 4' 3" high (67 cm × 99 cm × 1.31 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Commercial kitchen and buffets library: 96 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
A narrow service cart with a solid end panel at the rear, drawn in plan for hotel housekeeping corridors, hospital pantries and the dish return of a cafeteria. The end panel marks the push side; reach for it in ¼ in = 1 ft (1:50) back-of-house layouts, in elevator studies and wherever carts must park nose-in against a wall.
Clearances to leave
The 26 in (67 cm) width leaves 21 in (53 cm) beside it in a 48 in (120 cm) corridor, enough for one person to squeeze past; the 39 in (98 cm) length parks end-on in a 43 in (110 cm) bay. Doors on the route should give at least 32 in (81 cm) clear.
Pairs with
Pair it with Mobile cart with end panel at front, the same cart drawn the other way around, and park both beside Food cart with four compartments and bumpers. A row of three with the panels to the wall tidies the plan.
Common questions
What are the dimensions of this block?
It measures 2' 2" | 67 cm wide by 3' 3" | 99 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 2' 2" wide, 3' 7" deep and 4' 3" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing, as a stainless unit at counter height, with its wells pressed into the top. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 2' 2" | 67 cm, depth 3' 3" | 99 cm, footprint 7.1 ft², height 4' 3" | 1.31 m.
Explore at scale
How big is it?
Footprint 7.1 ft², about 0.4× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 2.20 in × 3.23 in on Letter.
In the room
Plan at real sizeAll 2 checks pass
Commercial kitchen layout
Built around the mobile cart with end panel at rear, the block you are viewing.
Checks
- Working aisle in front of the unit16' 5"Minimum 2' 11", recommended 3' 6"
- Door swing to the nearest fixture12' 3"Minimum 2", recommended 4"
Design notes
- Working aisles 3' 6" to 4' 0"; main traffic aisles where staff pass each other 4' 11".
- Keep cooking, washing and serving in a one-way line so clean and dirty routes never cross.
The kit, 4 blocks